Table of Contents
Advertisement
1. "Alarm" button (triggering active and archived alarms, clearing alarms). When the alarm is
active, the button is illuminated in red.
2. Button for changing the operating modes (OFF / Auto / Low / Eco / Comfort). Confirmation
with "Enter"
3. "ESC" button (return to previous field or screen)
4. Status of the air handling unit (fan operation / stop, heating / cooling, activation of heat
recovery, alarm, manual stop, etc.)
5. Current date
6. Current operating mode
7. Current fan control
8. Current value of the leading temperature
9. Current time
10. Arrows to navigate up and down and to change parameter value
11. "Enter" button. Selecting the parameter to be changed, confirming the selected value.
12. Set value of the master temperature
13. Icon informing about readiness to choose one of the three HMI operating modules (Info / Set
/ Menu). Changing the module with the arrow buttons, confirming with the "Enter"
"Info" module (preview of the control panel operation status - available without
logging in)
"Set" module (changing the settings of user parameters: performance, temperature,
humidity, CO2 and setting the timer - available without logging in)
"Menu" module (enables the introduction of configuration changes to the AHU and
its components as well as programming of EC motors, available only after logging in)
Some screens hide when not active.
Info/Set/Menu
Advertisement
Table of Contents
