Page 1
INSTALLATION & USER MANUAL CCU3 CENTRAL CONTROL UNIT...
Page 2
- The RS1 rain sensor is supplied complete with 5 metres of cable. If this is not sufficient the cable can be extended to a maximum of 50 metres using 3 x 0.5mm cable. CCU3 - USER MANUAL...
Page 3
Turn on the power to the CCU3 control unit. PRESS and HOLD the ‘LEARN’ button on the CCU3 until the buzzer makes a short sound, then release. Within a few seconds press the ‘STOP’ button on the remote transmitter.
Page 4
The Rain Sensor takes 1st priority so all other inputs will be disabled while rain is still present. Once rain is no longer present it will take up to 8 minutes before other inputs can be used. CCU3 - USER MANUAL...