Dimplex DPRC40U Instruction Manual page 15

SLEEP (SLEEP mode key)
a. SLEEP function in COOLING mode:
• The indicator <
• The setting temperature increase 1°C/2°F after an hour, increase
2°C/4°F after 2 hours and keeps the setting temperature unchanged.
b. SLEEP function in HEATING mode:
• The indicator <
• The setting temperature decrease 1°C/2°F after an hour, decrease
2°C/4°F after 2 hours and keeps the setting temperature unchanged.
c. SLEEP function is inactive in DEHUMIDIFYING mode.
STANDBY Mode
In standby mode, only indicator <
TIMER Mode
(1) TIMER scale: from 0 to 24 hours.
(2) Use the TIMER to set the Auto-Off time during operating, or set the
Auto-On time in standby mode.
(3) While setting the TIMER, either the key <
to adjust the desired time.
(4) Each press of the TIMER key, the value on display <
from"00"
(5) Set the Auto-Off timer:
a. Press the key <
b. Press the key <
(6) Set the Auto-On timer:
a. While setting the Auto-On timer, you can preset the functions at
b. Press the key <
c. Press the key <
d. After setting up the Auto-On timer, the unit is still available to be
15429_Dimplex DPRC40U Manual.indd 15 15429_Dimplex DPRC40U Manual.indd 15
> lights on.
> lights on.
"01"...... to"24" and back to "00" again.
→ →
> to preset the Auto-Off timer, and the display
< > flashes the setting time on screen. After setting up, the
display returns to show the operating mode after 5 seconds.
> before the preset time to cancel the Auto-Off
timer, and the unit will be turned off directly.
the same time.
> to set the Auto-On timer. After setting up, the
display shows the rest of time.
> before the preset time to cancel the Auto-On
timer, and the unit will be turned on directly.
controlled or be switched to other functions.
> and < > light in low brightness.
> or the dial < > is available
> increase
15
9/09/20 6:40 PM 9/09/20 6:40 PM