Advertisement
Steelcase, Inc.
Grand Rapids, MI 49501
U.S.A.
1-800-227-2960
Installation For 4 & 5 Wire Duplex Receptacle Into:
Series 9000
2" P-Series Mobiles Power Panel
Series 9000
NO CONTACT
4 OR 5 WIRE
4 OR 5 WIRE
5-WIRE
Tools
Assembly Directions
Structural Panel
®
Energy Management Worksurface
®
WIRING INFORMATION
MODEL NO.
DESCRIPTION
98665-1
LINE 1 DUPLEX
98665-2
LINE 2 DUPLEX
98665-3
LINE 3 DUPLEX
All electrical installations should be done by a
qualified person in accordance with codes and
regulations applicable at the installation site.
NO CONTACT
POWERWAY SYSTEM
HOT WIRE CODE
"L-1" (APPLICATION CIRCUIT)
"L-2" (LIGHTING CIRCUIT)
"L-3" (E.I.P CIRCUIT)
Printed In U.S.A.
NO CONTACT
COLOR
RED WIRE
BLACK WIRE
BLUE WIRE
93-9501147 -
REV
Page 1 of 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Steelcase 98665-1
- Page 1 Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-800-227-2960 Installation For 4 & 5 Wire Duplex Receptacle Into: Series 9000 Structural Panel ® 2” P-Series Mobiles Power Panel Series 9000 Energy Management Worksurface ® NO CONTACT NO CONTACT NO CONTACT WIRING INFORMATION POWERWAY SYSTEM MODEL NO.
- Page 2 Panel Base Receptacle Installation Remove trim by pushing down on steel tabs at the bottom extreme ends (in area of glides) and lifting straight up and out. APPLY PRESSURE TO STEEL TABS BASE TRIM Position duplex receptacle to panel powerway assembly. Secure receptacle with (2) screws STRUCTURAL PANEL POWERWAY...
- Page 3 2” P-Series Mobiles Power Panel (Base Receptacle) Remove trim by pushing down on steel tabs at the bottom extreme ends (in area of glides) and lifting straight up and out. PANEL ASSEMBLY BASE TRIM Position duplex receptacle to panel powerway assembly. Secure receptacle with (2) screws DUPLEX RECEPTACLE...
- Page 4 Series 9000 Energy Management Worksurface Open worksurface channel cover and push receptacle onto powerway connector (at right end of powerway). Secure with (2) screws and close worksurface channel cover. POWERWAY DUPLEX RECEPTACLE WORKSURFACE CHANNEL COVER Assembly Directions Page 93-9501147 REV - 4 of 4...
Need help?
Do you have a question about the 98665-1 and is the answer not in the manual?
Questions and answers