Belkin F8Q1000 User Instructions

P73796_F8Q1000_man.qxd
Belkin ® USB Sync Charger for iPAQ
Charging your iPAQ series handheld
through a powered USB port:
Plug the Sync Charger's USB connector into
1
an available USB port on a desktop or
laptop computer.
Plug the other end of the Sync Charger into the
2
autosync connector at the base of the handheld.
Be sure that the word PUSH is facing up. The
Sync Charger will snap into place when securely
attached.
3 Charge times will vary, but a fully discharged
iPAQ handheld should charge completely
within 2.5 hours, if not operated during the
charging cycle.
To remove the cable from the autosync
4
connector, depress the PUSH release on the head
of the cable and gently pull back until the
connector is released.
5/23/02 1:59 PM Page 1
™ Pocket PC User Instructions:
Charging your iPAQ series handheld through a
USB automobile cigarette lighter socket:
Plug the USB cigarette lighter adapter into the
1
car's cigarette lighter socket.
Plug the Sync Charger's USB connector into the
2
USB receptacle located in the tip of the adapter.
Plug the other end of the Sync Charger into the
3
autosync connector at the base of the handheld.
Be sure that the word "PUSH" is facing up.
The connector will snap into place when
securely attached.
Charge times will vary, but a fully discharged
4
iPAQ handheld should charge completely
within 2.5 hours, if not operated during the
charging cycle.