Download Print this page

Sagola 4240 Instructions For Use

Face mask

Advertisement

Quick Links

This complete breathing system includes a belt, pocket regulator,
coalescent filters to remove low levels of moisture and oil, along with
10m of breathing hose and a 1.5m spray gun hose.
DIMENSIONS OF PRODUCT
Weight without filters:
Weight with filters:
Height:
Length:
Width:
LIMITATIONS OF USE
Protection will only be offered if the unit is fitted correctly.
The filter will not remove Carbon Monoxide or other toxic gases. The filter changes to red when
contaminated and must be changed immediately.
The unit is not designed for use in atmospheres containing flammable gas mixtures.
The unit is designed for use against contaminants, which are not immediately dangerous to life
and health or where self-contained breathing apparatus is not essential.
The unit, when in contact with the skin may cause allergic reactions to susceptible individuals.
If this occurs leave the hazard area, remove and seek medical advice.
RESPIRATORY PROTECTION
463 g. (Approx.)
483 g. (Approx.)
175 mm.
140 mm.
45 mm.
TECHNICAL
SPECIFICATION
4240
+ BELT REGULATOR
+ 10M BREATHING HOSE
MATERIALS - CARBON FILTER
• Zamak body • Carbon element
• Polycarbonate bowl
• Complete with Nitto high flow fittings
Supported in Australia by:
www.axalta.com.au
1800 292 582
FILTER
FACE MASK

Advertisement

loading

Summary of Contents for Sagola 4240

  • Page 1 FILTER TECHNICAL SPECIFICATION 4240 FACE MASK + BELT REGULATOR + 10M BREATHING HOSE RESPIRATORY PROTECTION This complete breathing system includes a belt, pocket regulator, coalescent filters to remove low levels of moisture and oil, along with 10m of breathing hose and a 1.5m spray gun hose.
  • Page 2 FILTER TECHNICAL SPECIFICATION INSTRUCTIONS FOR USE Fasten waistband around the waist with the preset regulator situated above the right hip. Ensure that the faceshield fits comfortably and securely on the head. Connect the compressed air supply tube to the preset regulator. CONFORMITY Should vibration occur upon connection, decouple and reconnect slowly.