PATONA 9882 Manual page 33

02 - LCD TOUCH MONITOR 5"
- User LUT
- [User LUT mode]: Use this item to choose one of the User Log modes (1-6).
Please install the User LUT as follows:
- The User LUT must be named with .cube in the suffix.
Note! The device only supports the following User LUT format: 17x17x17 /
33x33x33; Data order is BGR; Table order is BGR. If the format does not meet
the requirement, please use a conversion tool "LUT Tool" to transform it.
-Naming the User Log as User1-User6.cube, then copy the user Log into
USB flash disk. Insert the USB flash disk (max. 16GB, FAT32 formatted) to
the device, the User Log is saved to the device automatically at the first time.
the power indicator will flash when User Log is saved, stop flashing when
saved completely.
Default: User1
If the User Log is not loaded for the first time, the device will pop up a prompt
message. Please choose whether to update the existing LUT or not.
Note! Name the User Log to User1-User6. After you have saved the LUT
table from the USB flash disk to the monitor, please power it off and unplug it
to restart the device.
12