Advertisement
nach Wahl in der Bestellung
According to choice in order
184
165
165
PH2
SW13
Fastening components
Befestigungsteile
68 x
8,4 DIN 125 A
8 x
4,8x13 DIN 7981 C
68 x
Nutenstein
8 x
M6x16 SN ISO 7380 A2
68 x
M8x12 DIN 7984
2 x
M10x55 DIN 933
2 x
M10x90 DIN 931
Der Doppelstockparker ist beliebig erweiterbar
The Vario Lift can be infinitely extended
Anschrift
STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland
Tel.
+49 40 702 918-0
Fax
+49 40 702 918-28
Doppelstockparker
-Lindau-
(für 4 Einstellplätze)
Bicycle rack
-Lindau-
(for 4 parking places)
SW17
SW19
12 x
M10x110 DIN 931
16 x
M10 DIN 934
32 x
10,5 DIN 125 A
6 x
M12x140 DIN 931
6 x
M12 DIN 934
12 x
13 DIN 125 A
E-Mail
info@stein-hgs.de
5
Web
stein-hgs.de
Advertisement
Table of Contents
Summary of Contents for Stein HGS Lindau
- Page 1 13 DIN 125 A M10x90 DIN 931 Der Doppelstockparker ist beliebig erweiterbar The Vario Lift can be infinitely extended Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0 +49 40 702 918-28 E-Mail info@stein-hgs.de...
- Page 2 (3) (Figure a). Then screw the connection profiles (3) to the brackets (2). For serial assembly definitely observe Figures 4a-c on page 3! Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0...
- Page 3 (Figure a). For the purpose, 7+8 the plates are mounted horizontally by a bore (Figure b) and the mounting bracket is screwed 35 mm apart (Figure c). Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0...
- Page 4 (Länge/length 1.704 mm) 19 21 Mounting the supporting elements – Overview of components. Montage der Tragelelemente - Übersicht Bauteile. Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0 +49 40 702 918-28 E-Mail info@stein-hgs.de...
- Page 5 Finally adjust the support arms with 2% slope upwards (see Figures a-c) to prevent the guide rails from rolling forward. Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0 +49 40 702 918-28 E-Mail info@stein-hgs.de...
- Page 6 All sliding nuts must be inserted before the rails are capped! Cap the rail ends with the 4 plates (24) provided. Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0...
- Page 7 Slide the guide rails (14+15) from behind via the guide rollers on the support arms (13). Set and bolt 2 safety blocks (18) in the guide rail ends. Cap the guide rail ends (13) with the plates (19/20) (see Figures a and b). Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0...
- Page 8 For serial assembly, the mounting of the cross members (3) is carried out according to the dimensions shown. Anschrift STEIN HGS GmbH | Beckedorfer Bogen 15 | 21218 Seevetal | Deutschland Tel. +49 40 702 918-0 +49 40 702 918-28 E-Mail info@stein-hgs.de...
Need help?
Do you have a question about the Lindau and is the answer not in the manual?
Questions and answers