Bea-fon VISITOR 1V Manual page 32

Paring the chime
PAIR VIA PRESSING RINGING BUTTON
Note: Doorbell and Chime have been configured before leaving the factory.
If the chime isn't paired by default, please use the following instructions to pair
it manually with the doorbell camera.
Step 1
Supply power to your Chime
and Doorbeell.
Step 2
A short press on the RESET
button on the Chime, and you
will see the indicator flashes
blue,indicating device is in
pairing mode.
Step 3
Press the doorbell button,
and the Chime will sound to
react.Pairing succeeds,
and the Chime indicator will
be in soild blue.
USB compatible
charger(DC5V)
(not included)
Reset Button
32
LED Indicator