Summary of Contents for iTrack EGO Series
- Page 1 Installation, operation and maintenance manual Cooling units for door or wall mounting ATTENTION! Read carefully and completely before installation. Keep the manual until unit decommissioning.
-
Page 2: Table Of Contents
1. Cooling unit application 1.1 Intended use 1.2 Improper use 2. Supply 3. Updates 4. Technical features 5. Transport and handling 6. Installation 7. Condensate discharge hose 8. Electrical connection 8.1 Safety 8.2 Two-phase models with autotransformer 8.3 Alarm pins 9. -
Page 3: Cooling Unit Application
1. Cooling unit application The EGO series cooling units described in this manualare designed and built to cool the air inside electrical switchboards in order to protect components sensitive to thermal sh ock. They also provide IP54 ingress protection against contaminating and aggressive/corrosive substances. -
Page 4: Technical Features
4. Technical features (figures F. 14 and F. 15) The unit’s technical features and CE marking are given on the data plate attached to the cooling unit. 5. Transport and handling During transport and storage the cooling unit must be kept in a vertical position, as indicated on the packaging (figure F.01), and must not be exposed to temperatures above 70°C or below -20°C. -
Page 5: Alarm Pins
The cooling unit is fitted with a TX050 electronic thermostat. See the specific manual C17000199 included with the unit for the functions of this thermostat and how to program it. ITRack S.r.l. shall be in no way heldliable for any alterations the customer may make to the default parameters if they have not received authorisation to do so. -
Page 6: Safety Devices
11.2 Safety devices. The refrigeration circuit is fitted with a high-pressure safety switch P (figure F.12) set to the maximum working pressure of the cooling unit. If this threshold is exceeded, the pressure switch stops the compressor working. It resets automatically. -
Page 7: Pictograms
13. Pictograms... - Page 8 13. Pictograms...
-
Page 9: Technical Data
14. Technical data F.14... -
Page 10: Performances
15. Performances F.15... - Page 11 15. Performances F.15 P(W) Ta(°C) Ti (°C) Useful cooling Ambient Enclosure internal output temperature temperature...
-
Page 12: Dimensions
16. Dimensions F.16... - Page 13 16. Dimensions F.16...
-
Page 14: Spare Parts
17. Spare parts F.17 When ordering the following Autotransformer informations are essential: Condenser fan Model Evaporator fan Serial Number Condenser Date of production Evaporator Requested parts’ code Compressor Assembly accessory kit Cover Electric Control... - Page 15 17. Spare parts F.17...
- Page 16 17. Spare parts F.17...
-
Page 17: Wiring Diagram
18. Wiring diagram F.18... -
Page 18: Guarantee
19. Guarantee ITRack S.r.l. guarantees its product free from quality defects. It also guarantees for 18 months all the product’s components starting from the date of shipment and when they are used in the following conditions: 1) When the temperatures of the panel or enclosure are no higher or lower than those indicated on the rating plate.
Need help?
Do you have a question about the EGO Series and is the answer not in the manual?
Questions and answers