Page 5
Put the lever body (4) with the screw (5) on the valve spindle extension (B) - fig. 2.4. Check if it is possible to obtain the lever position as shown in the picture 2.8. If you cannot obtain satisfactory position of the lever (4) in relation to the edge of the installation visible –...
Page 7
the lever is set as recommended in the manual: Turning the lever by Para la posición de la manilla recomendada en el manual: ar la manilla to the left results in outflow of water through the hand shower, a la causa la salida del agua por la regadera, volver con la returning the lever to the starting setpoint results in the outflow of water manilla a la posición inicial causa la salida del agua por el caño.
Need help?
Do you have a question about the INCANTO G-11255-LM55B T Series and is the answer not in the manual?
Questions and answers