Page 1
1400 INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC Product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
Page 2
INSTALLATION INSTRUCITONS STEP 1 Remove the cover by twis�ng the diffuser an�-clockwise and set aside. Carefully remove the LED tray and unplug it from the LED driver, and set aside STEP 2 STEP 3 Hold the product in place, mark & drill the holes Make the AC Power connec�on through the into the wall and nail the alligator into the hole.
Page 3
Disconnect the ba�ery pack, the charging indicated LED off. NOTE: A�er installa�on, allow 36 hours to ensure full ba�ery charge and then interrupt the supply. In case of any query/issue with the product please reach out to us at support@vtacexports.com V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B...