Advertisement
With the nano silver & tourmaline heating plates, the straightener can be used to remove curls from hair
and is also great for giving straight hair added bounce by creating locks and waves. The straightener also
features an extra-long rotatable cord, an LCD screen, on/off button, temperature '+' button and temperature
'-' button.
INSTRUCTIONS FOR USE
Plug the plug into the wall socket. Press the on/off button shortly to turn on the appliance. The LCD
illuminates and shows the setting temperature. The default setting is 170°. Press the temperature buttons
("+" or "-") to set your required temperature. Press the temperature adjustment buttons repeatedly to
increase/decrease the set temperature in steps of 10°. When the temperature is set, the set temperature
flashes on the LCD. The set temperature will remain displayed on the LCD once the temperature of the
heating plate has been reached. The straightener is now ready for use.
The straightener is suitable for use when the hair is dry or wet. Take a section of hair of approximately
5cm in width and smooth it out with a comb. Place the hair between the hot plates and close the tong
firmly around the hair. For best results, work from the roots to the tips of the hair. Depending on your hair
type, hold the tong in position for a few seconds. Take the hair out of the tong by loosening the tong and
moving the hair carefully away from the plates.
Note:
- Don't use the appliance if the hair has drips.
- Never use the appliance near water.
- The heating plates are hot during and after use. Don't touch the hot plates during use.
- The straightener cuts off automatically after turn on for 1hour.
MAINTENANCE AND CLEANING
Caution: Allow the appliance to cool down completely before cleaning.
1. Remove the plug from the socket and allow the straightener to cool down.
2. Use a damp cloth to wipe the appliance and the heating plates clean.
3. Wipe the appliance dry with a clean dry cloth and store in the original packaging when not in use.
PRINCESS TIPS
1. Always unplug the appliance when not in use and before cleaning. Never leave the straightener unattended.
2. If the cord is damaged, do not use the appliance, but send it to our service department for repair.
3. Do not wrap the cord around the appliance.
4. This straightener is only suitable for household use.
5. Children should be supervised to ensure that they do not play with the appliance.
6. The use of this appliance by children or persons with a physical, sensory, mental or motorial disability,
or lack of experience and knowledge can be dangerous. Persons responsible for their safety should give
explicit instructions or supervise the use of the appliance.
U.K. WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE
NEUTRAL
BROWN
LIVE
As the colours of the wire in the mains lead of this appliance may not correspond with the colour
markings identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red.
WARNING: ON NO ACCOUNT SHOULD EITHER THE LIVE OR NEUTRAL
WIRES BE CONNECTED TO THE EARTH TERMINAL
If a 13 amp plug is used with this appliance, a 3 amp fuse should be fitted. If any other type
of plug is used, a 15 amp fuse must be fitted either in the plug or at the distribution board.
5
Advertisement
