Installation - Elsea ZSP650MAN Use And Maintenance Manual

1
1
1
1

INSTALLATION

After unpacking the sweeper, install the
1
handle in operating position and the brush
on the relative support arm according to
the following procedure:
Unscrew locking wheels (1).
Lift the handle to the operating position
(1).
Reposition wheels (2). Make sure to
tighten them hard in the proper place on
the handle.
2
Take the brush out of the dirt container.
Lift the support arm to a vertical position.
Position the brush against the rotary
support. Make sure that brush holes and
support holes are matching.
Firmly secure the brush to its support with
the screws supplied with the product (1).
21
ZSP650MAN