Advertisement
Quick Links
Table of Contents
Logging into the IXW-PBX
Page 2
-Where to locate the password for the IXW-PBX, and how to log into the device
Setup Wizard
Page 2-4
-
Step-by-step instructions for the initial setup of the IXW-PBX
SIP Settings
Page 5
-
Configure the SIP settings for the IXW-PBX
Editing Extensions
Page 6
-
Adding IX Series devices to the IXW-PBX
VoIP Trunk Settings
Page 7
-
Setting up a VoIP Trunk
Analog Trunk Settings
Page 8
-
Setting up an Analog Trunk
Registering a Phone Number
Page 8-9
-
Adding a Phone Number to the Support Tool
Page 9
Adding an Outbound Route rule
-
Creating an outbound route for analog dial out
Page 10
Registering the IXW-PBX
-
Adding the IXW-PBX to the Support Tool
Page 10
Configuring Grandstream Wave Lite Mobile App
-
Adding the IXW-PBX to the Support Tool
Uploading
Page 10
-
Uploading Settings to Stations
For more details about the features and information above, please contact Technical Support.
Aiphone Corporation | www.aiphone.com | tech@aiphone.com | (800) 692-0200
IXW-PBX
Programming Guide
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Aiphone IXW-PBX
Summary of Contents for Aiphone IXW-PBX
- Page 1 Programming Guide Table of Contents Logging into the IXW-PBX Page 2 -Where to locate the password for the IXW-PBX, and how to log into the device Setup Wizard Page 2-4 Step-by-step instructions for the initial setup of the IXW-PBX SIP Settings...
- Page 2 Logging into the IXW-PBX Access the IXW-PBX by entering its IP address and port in a browser. The IP address of the IXW-PBX will be shown on its LCD screen, and the port used is 8089. Example: 1.1 - Login...
- Page 3 Setup Wizard - Network Settings The network settings for the IXW-PBX will need to be changed in order for it to communicate with IX Series products. Change the Method to “Switch”. The LAN settings will need to match your local network.
- Page 4 Setup Wizard - Extensions Extensions are how the IX Series stations are assigned in the IXW-PBX. Once an extension is created the extension number cannot be edited. For this reason, select Disable Extension Range, and set the Create Number to 1. Set the Start Extension to your first station number, and use a custom SIP Password that will be assigned to all extensions.
- Page 5 From the menu bar on the left, expand PBX Settings and click SIP Settings. Adjust the following values pictured below. General Tab TCP/TLS Tab NAT Tab For more details about the features and information above, please contact Technical Support. Aiphone Corporation | www.aiphone.com | tech@aiphone.com | (800) 692-0200 Page 5...
- Page 6 Editing Extensions An extension is necessary for each IX Series station to be registered with the IXW-PBX. The extension number will be assigned to the station in the IX Support Tool in the following steps. To configure this, expand Extension/Trunk and click Extensions. Click highlighted below to make changes to the existing extension.
- Page 7 VoIP Trunk Settings The IXW-PBX will allow SIP Trunks to be used for outbound calls. To configure this, expand Extension/Trunk and click VoIP Trunks. At the top of the page click the Add SIP Trunk button. Use the Type drop-down and select Register SIP Trunk and enter the Provider and Host Name of the SIP Trunk service provider.
- Page 8 Analog Trunk Settings The IXW-PBX will also allow for Analog Trunks for outbound calls utilizing a POTS line plugged into one of the FXO Ports on the back of the device. To configure this, expand Extension/Trunk and click Analog Trunks.
- Page 9 Expand Extension / Trunk from the menu on the left and click on Outbound Routes. Once the Outbound Routes page opens click on the Add button. Click Save For more details about the features and information above, please contact Technical Support. Aiphone Corporation | www.aiphone.com | tech@aiphone.com | (800) 692-0200 Page 9...
- Page 10 Registering the IXW-PBX The IXW-PBX must be registered to the IX Series stations for the stations to call out. From the menu on the left, expand Network Settings and click SIP. Enter the extension number in the ID column, the SIP password in the password column, and the IP address of the IXW-PBX in the IPv4 Address column.
- Page 11 Configuring Grandstream Wave Lite (cont.) Select SIP Account as it is being registered with the IXW-PBX as a SIP extension. Then enter the Account Name (Extension Name), SIP Sever (IP Address of IXW-PBX), SIP User ID (Extension Number), SIP Authentication ID (Extension Number), and Password (SIP Password). Once completed tap the check mark in the top right corner to finalize the settings.
Need help?
Do you have a question about the IXW-PBX and is the answer not in the manual?
Questions and answers