Sinee EA180 Manuallines For Quick Debugging

SINEE
Guidelines for Quick Debugging of
EA180 Pulse Series Servo Drives

Preface

In order to improve the user experience of customers and distributors, our
company has carried out many rounds of optimization on the debugging of servo
system to facilitate the use and debugging of customers. In order to further enhance
the user experience, our company has formulated the following rapid debugging
guidelines to facilitate customers to use and debug faster.
1, please make sure that the connection between drive and motor, power supply and
output is correct, and that there is no accident such as short circuit between the lines.
2, after confirming that there is no abnormal connection, the power-on operation will
be carried out. If the connection is correct, it will not lead to failure report. If there is
an accident, please contact our engineer to solve it.
3, if your drive, motor, cable and other servo systems are purchased from our company,
then you can proceed directly to the fourth step. For key operation, please refer to
Chapter 4 of our user manual for display and operation.
If your motor has been determined to be the type of motor supported by our servo
system, the following operations can be carried out to match the motor with the drive.
Note: Our company only supports motors with Tamagawa encoder）
Shenzhen Sine Electric Co.,Ltd.