E-Heater Setting; Blow Setting - ACPro A Series Service Manual

3.9 E-heater Setting

E-heater (also known as auxiliary electric heating function).
• This setting improves the efficiency of the heater function.
• Press the Function button in heating mode to enter E-heater setting interface.
• Pressing ENTER/CANCEL to cancel out of this function.
Turn off the unit, without
E-heater function activated

3.10 Blow Setting

When the unit is turned off, the water in the evaporator of the indoor unit will automatically be evaporated to avoid mildew.
• In COOL or DRY mode, press the function button until the unit enters the blow setting.
• Press ENTER /CANCEL to activate this function.
• Pressing ENTER/CANCEL to cancel out of this function.
Turn off the unit,without
Blow function activated
17
Press Function repeatedly until
go to the E-heater setting status
Press Enter/Cancel to
cancel this setting
Press Function repeatedly until
go to the Blow setting status
Press Enter/Cancel to cancel
this setting
Press Enter/Cancel to activated
the E-heater function
Press Function repeatedly until go to
the E-heater setting function again
Press Enter/Cancel to activated
the Blow function
Press Function repeatedly until go
to the Blow setting function again
Technical Information