DI SkipDr 4070300 Instructions For Use

Disc Repair System
Model 4070300
©2018 Allsop, Inc. Bellingham, WA | info@allsop.com | 1-800-426-4303
Not for use with Blu-ray™, PS
®
Package Contents:
A
Disc Repair System
B
6 AA Batteries
C
Buffing Square
Disc guide
folds out
D
Drying Cloth
E
Rejuvenating Fluid
1 Insert 6 AA Batteries, following
directional prompts for "+" and "-"
engraved on housing.
2 Spray SkipDr Rejuvenating Fluid
®
lightly onto the play-side of the disc
(do not spray on the label-side).
3 Repair the disc by inserting it into
the SkipDr Disc Repair System with
®
play-side toward the FlexiWheel™.
Press the "ON/OFF" button on top of
the device to start the process. After
the disc has made 2 full rotations,
press the button again to stop.
4 Dry the play side of the disc with the
blue Drying Cloth. Then place the disc
on top of the Drying Cloth and buff
using the white Buffing Square. Be
sure to wipe and buff your disc in a
radial pattern (from the inside center
to the outside rim of the disc in a
straight line).
3/4, Xbox One, or Wii U™ discs.
®
C-E can store in back of system
D
A
C
B
Disc Repair Tips:
• It is very important to keep discs wet during the resurfacing
process, or discs may become damaged.
• The final buffing step will help prevent new problems and
ensures the best repair results. You can buff as hard as you
want, as it will not harm the disc. It is normal for a slight
radial pattern to be left on the disc after the repair process
is complete ( i ).
• Be sure to wipe and buff your disc in a radial pattern:
from the inside center to the outside rim of the disc in a
straight line ( ii ). Do not wipe or buff in a circular pattern.
Keep the Buffing Square clean and free from debris which
could cause scratches. Replacement Buffing Squares are
included in SkipDr Disc Repair Replacement Kits, available at
®
digitalinnovations.com.
• If the disc is not completely repaired on the first try, repeat
E
until completely fixed or no further improvement is evident.
If the disc still skips, your disc player may need cleaning or
repair. Test your player with a disc that you know is not
damaged.
• The same disc can be repaired multiple times without
worry of damaging the data layer of the disc.
• Circumferential scratches (curved scratches that follow the
circumference of the disc) are more likely to cause problems
than radial scratches (scratches that run from the center to
the outside rim of the disc).
• A disc's play-side is usually the "shiny" side and the label-side
is the "dull" or "graphics" side.
• Discs with label-side damage cannot be repaired by any
method ( iii ). Scratches on the label side can damage the
data layer and render the disc unplayable. Please inspect
your disc carefully before repair to verify that scratches
causing possible issues are only on the play side of the disc.
• Store the Disc Repair System in a dust-free environment
at room temperature. If it is stored in a warmer or cooler
temperature, allow it to return to room temperature before
using.
• Use only exact replacement parts and accessories
as specified by Digital Innovations. Using generic or non-
recommended parts may cause irreparable damage to the
unit and disc, and void the warranty.
• If the unit starts to run slowly when using batteries,
replace the batteries and start repair process from
the beginning. If attempting to repair 30 or more discs
consecutively, it is recommended to use the optional AC
Power Adapter, available at digitalinnovations.com.
i
ii
iii
Limited lifetime warranty,
proof of purchase
required. For warranty
details, please visit
digitalinnovations.com/
warranty.html
For technical support, visit
digitalinnnovations.com