Prevue Pet Products F046 Instructions

Flight Cage
Models: #F046 (black) + #F047 (white)
Instructions online at www.prevuepet.com
1
To assemble the STAND UNIT,
you will need these pieces:
× 4
× 8
a
2
To assemble the CAGE UNIT,
you will need these pieces:
F046 + F047 — 09 /16— A4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com
read first
REVIEW BEFORE
ASSEMBLY
Lay one side frame on its side, attach the storage shelf with a
hex screw, then add and attach the opposite side frame.
Orient the lower side panel with the
grille/tray track facing the cage interior
and the open end facing the cage front.
Align the extended wires on the side
panel with the holes on the back panel
× 4
frame.
With the side panel inserted, lean the
back panel forward and let gravity hold
the pieces in position while attaching
together with a hex screw.
• TOOLS: An allen wrench and a
crescent wrench are included.
• Instructions are the same for
Flight Cage models #F046 and
#F047. They differ in color only.
• Assembly steps that would be
easier with a second person
are indicated with this symbol.
Attach the frame rail
with hex screws.
Carefully flip the
base stand unit
over...
...and attach the storage
shelf and the remaining
frame rail with hex screws.
Leave the unit leaning forward.
Orient the upper side panel with the
food/water cup door opening out to
the cage exterior.
Align the extended wires, insert
the panel in place, and attach with
a hex screw.
• For the best results, follow the
assembly steps in order.
For assistance or replacement parts,
please contact Prevue Pet Products:
312.243.3624
PHONE
www.prevuepet.com
ONLINE
EMAIL customerservice @ prevuepet.com
With the cage still on its side, add the
rolling casters into the frame legs.
Set the completed stand unit aside.
Leave the unit leaning forward.
Install and attach the opposite
side panels in the same order and
method.