Table of Contents
Advertisement
Quick Links
1
APPLICATION .................................................................................. 3
2
DESCRIPTION (FIG. 1) .................................................................... 3
3
PACKAGE CONTENT LIST ............................................................. 3
4
SYMBOLS ........................................................................................ 3
5
GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
5.1
Work area ................................................................................................................ 4
5.2
Electrical safety ....................................................................................................... 4
5.3
Personal safety ....................................................................................................... 4
5.4
Power tool use and care ......................................................................................... 5
5.5
Service ..................................................................................................................... 5
6
7
ASSEMBLY ...................................................................................... 6
7.1
Mounting the base plate (Fig. 3) (optional) ............................................................ 7
7.2
Fitting the column (Fig. 4) ...................................................................................... 7
7.3
Fitting the table (Fig. 5) ........................................................................................... 7
7.4
Fitting the head stock and motor (Fig. 6) .............................................................. 7
7.5
Fitting the hand feed handles (Fig. 7) .................................................................... 7
7.6
Fitting the chuck guard (Fig. 8) .............................................................................. 7
7.7
Fitting the 3 jaw chuck (Fig. 9-10) .......................................................................... 7
7.8
Connection to the power supply ............................................................................ 8
8
OPERATION ..................................................................................... 8
8.1
Using a machine vice (vice not supplied) (Fig. 11) ............................................... 8
8.2
Using the 3 jaw chuck (Fig. 12) .............................................................................. 9
8.3
Switching on and off (Fig. 13) ................................................................................ 9
8.4
Feed depth adjustment (Fig. 14)............................................................................. 9
8.5
Changing the spindle speed (Fig. 15) .................................................................... 9
8.6
Drill speed chart ...................................................................................................... 9
8.7
Belt tension (Fig. 17) ............................................................................................. 10
8.8
General guidelines for drilling .............................................................................. 10
9
CLEANING AND MAINTENANCE ................................................. 11
9.1
Cleaning................................................................................................................. 11
Copyright © 2020 VARO
POWX153
P a g e
| 1
EN
www.varo.com
Advertisement
Table of Contents
Summary of Contents for Power Plus POWX153
-
Page 1: Table Of Contents
POWX153 APPLICATION .................. 3 DESCRIPTION (FIG. 1) ..............3 PACKAGE CONTENT LIST ............. 3 SYMBOLS ..................3 GENERAL POWER TOOL SAFETY WARNINGS ......4 Work area ........................ 4 Electrical safety ....................... 4 Personal safety ....................... 4 Power tool use and care ..................5 Service ........................ - Page 2 POWX153 Lubrication ......................11 Spindle play (Fig. 18) .................... 11 General inspection (Fig. 19) ................. 11 Power cord ......................11 TROUBLE SHOOTING ..............11 TECHNICAL DATA ................ 12 NOISE ..................... 12 SERVICE DEPARTMENT .............. 13 STORAGE ..................13 WARRANTY ................... 13 ENVIRONMENT ................
-
Page 3: Application
POWX153 BENCH DRILL 350 W POWX153 1 APPLICATION Your bench drill has been designed for drilling holes in wood, metal and plastics. It is not designed for commercial use. Warning! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. -
Page 4: General Power Tool Safety Warnings
POWX153 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. -
Page 5: Power Tool Use And Care
POWX153 ▪ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. Power tool use and care ▪ Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. -
Page 6: Assembly
POWX153 ▪ When drilling long lengths of material ensure that there is adequate support at both ends of the material. ▪ Never use the machine without the safety guards in position and operating correctly. ▪ When drilling wood and wood type materials, ensure that the work piece is free from any nails or other foreign objects that could damage the drills and other cutting tools. -
Page 7: Mounting The Base Plate (Fig. 3) (Optional)
POWX153 ▪ Philips head screwdriver (not supplied). ▪ 3 x M8 x 20 mm bolts, washers and nuts for workbench mounting (not supplied). ▪ Chuck and chuck key. ▪ 4 mm hex key. Mounting the base plate (Fig. 3) (optional) ▪... -
Page 8: Connection To The Power Supply
POWX153 ▪ Place chuck (9) onto the exposed stub shaft. ▪ Place a piece of wood onto the drill table. ▪ Using feed handles (3) lower the chuck (9) onto the wood. ▪ Gently apply pressure to engage the taper and then let the spindle raise to its upper position (Fig. -
Page 9: Using The 3 Jaw Chuck (Fig. 12)
POWX153 ▪ If the drill jams into the work piece an unsecured machine vice will spin out of control causing the drill to snap and possibly injure the operator (Fig. 11). Using the 3 jaw chuck (Fig. 12) ▪ Select the drill bit required. -
Page 10: Belt Tension (Fig. 17)
POWX153 ▪ Slacken the belt tension locking knob. This will allow the tension on the drive belt to be released. ▪ The motor assembly is hinged to allow tensioning of the drive belt. To move the drive belt to the desired pulley arrangement push the belt on the largest drive spindle pulley towards the next smallest pulley and at the same time rotate the drive spindle, by hand until the drive belt locates onto the next smallest pulley. -
Page 11: Cleaning And Maintenance
POWX153 ▪ Warning: Never cool with water or water based lubricant otherwise an electric shock could occur. DO NOT use oil when drilling copper or brass. Care should be taken when drilling copper and brass as the drill bit will be prone to jamming. -
Page 12: Technical Data
POWX153 2.5 Drill bit not being allowed 2.5 Lubricate drill bit when to cool down or not cutting. Follow S2 duty cycle lubricated in use time 3. Wood splinters on 3. No back-up material 3. Use back-up material underside under workpiece 4. -
Page 13: Service Department
POWX153 13 SERVICE DEPARTMENT Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). -
Page 14: Declaration Of Conformity
POWX153 17 DECLARATION OF CONFORMITY VARO N.V. -Vic. Van Rompuy N.V.- Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: Bench drill 350 W trade mark: POWERplus model: POWX153 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
Need help?
Do you have a question about the POWX153 and is the answer not in the manual?
Questions and answers