Application - Haussmann Z1C-DW-30M1 Operator's Manual

ADDITIONAL SAFETY WARNINGS
WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals
are:
1) Lead from lead-based paints.
2) Crystalline silica from bricks and cement and other masonry products
3) Arsenic and chromium from chemically treated lumber.
4) Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.

APPLICATION

Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The rotary hammer is intended for hammer drilling in concrete, brick and stone.
It can be set to rotation only-for drilling into metal and wood products, and also
hammer only- for chiseling brick, concrete and masonry products.
Check the delivery parts
Carefully remove the tool from its packaging and check if the following parts are
complete:
--Rotary hammer
--Auxiliary handle
--Drill bits, Chisel bits etc
--Dust cap
--Grease /depth gauge/wrench
If any parts are missing or damaged, please contact our Customer Service at the
number indicated on the front page.
Product Features
The numbering of the product features refers to the illustration of the tool on the
graphics page.(see figure A)
1. Dust shield
2. Locking sleeve
3. Depth gauge
4. Wing nut
5. Gearbox cover
6. Trigger switch
7. Rear selector lever
8. Top selector knob
9. Auxiliary handle
20
!