Download Print this page

Remedic REM280003 Quick Start Manual

Eye drop dispenser

Advertisement

Quick Links

EYE DROP DISPENSER
Application aid for easy
dispensing of eye drops
t
P190219_REMEDIC_Eyedrop_Dispenser_GB_IM_20200401.indd 1
• This application aid is suitable
for most common eye dropper
bottles.
• This eye drop dispenser reduces
the risk of injury by preventing
direct eye contact with the tip of
the bottle.
• Eye infections caused by a dirty
tip are thus prevented.
• The soft edge of the applicator
holds the eye open and the
drops land safely in the eye.
• Please read these instructions
carefully before use.
Notes on eye drops
• It is recommended to warm the
eye drops to approximately body
temperature.
• Eye drops should only be used
after consulting your doctor.
• Pay attention to personal hygie-
ne when using eye drops.
• The exact handling depends on
the product. In some cases there
may be a need to remove con-
tact lenses as they may cause
interactions, especially if you use
other eye drops. Please always
read the package insert for the
corresponding preparation.
• Before dispensing the drops
in the eye, wash your hands
thoroughly and dry them.
• Clean the eye drop dispenser
regularly under running water
and, if necessary, use some
detergent.
• Allow the eye drop dispenser to
air dry.
• Never clean the applicator with
alcohol, acetone, petrol, aggres-
sive detergents, etc.
2/4/2020 11:09 AM

Advertisement

loading
Need help?

Need help?

Do you have a question about the REM280003 and is the answer not in the manual?

Questions and answers

Summary of Contents for Remedic REM280003

  • Page 1 • This application aid is suitable • Eye drops should only be used • Never clean the applicator with for most common eye dropper after consulting your doctor. alcohol, acetone, petrol, aggres- bottles. • Pay attention to personal hygie- sive detergents, etc. • This eye drop dispenser reduces ne when using eye drops. the risk of injury by preventing • The exact handling depends on direct eye contact with the tip of the product. In some cases there the bottle. may be a need to remove con- EYE DROP DISPENSER • Eye infections caused by a dirty tact lenses as they may cause tip are thus prevented. interactions, especially if you use Application aid for easy • The soft edge of the applicator other eye drops. Please always dispensing of eye drops holds the eye open and the read the package insert for the drops land safely in the eye.
  • Page 2 Inserting the eye dropper Dispensing the eye drops bottle into the applicator 1. Flip open the applicator. 3. C lose the eye dropper bottle. 1. Flip open the applicator and 3. P osition the eye drop dispenser 2. Remove the lid from the eye 4. C lose the applicator with a snap. remove the lid from the eye on the eye and bend your head dropper bottle and insert the bot- dropper bottle. backward as far as you can. tle into the applicator from below. 2. C lose the applicator with a snap. Look up and try not to blink while Make sure the eye dropper bottle The eye drop dispenser is now dispensing the eye drops. sits firmly in the applicator. ready for use. If necessary, slightly squeeze the eye dropper bottle.