Advertisement
PLMRF65SW / PLMRF65SB
Installation Guide
Important Note:
The Pyle Model: PLMRF65SW / PLMRF65SB speakers are designed as supplemental / additional
external speakers -- to expand your audio and work with the primary marine speaker system
(Pyle Model: PLMRF65MW / PLMRF65MB -- sold separately).
Signal connection
as passive speaker
(Follow
on
)
Ways to Connect
I I I
Finding main speaker (R channel) on PLMRF65MB/or
PLMRF65MW,and using pins to push respective "CH Set"
simultaneously to get RF Wireless connection
I
1."Turn on Bluetooth"
2."Choose PyleUSA"
www.PyleUSA.com
I I
Signal connection
as passive speaker
(Follow
on
)
Ways to Connect
I I I
Main speaker (R Channel)
of PLMR65MB/PLMR65MW
" Bluetooth
Pairing Tone"
LED INDICATOR
Status
Main Speaker ( R Channel)
POWER ON
RF Wireless Connection with
PLMRF65MB/or PLMRF65MW
Bluetooth Connection
RCA AUX-IN Connection
PLMRF65SW/PLMRF65SB Installation
Ways to Connect
•
RF Wireless Audio Connection:
Install both speakers, as active powered
speakers to expand your sound system.
Connect L and R Channel speakers, each to a
12V power source. Then use pins to press the
"CH Set" buttons, simultaneously to pair the
speakers. Upon successful power connection,
the R Channel speaker LED indicator light will
shine red -- and when a successful / complete
wireless RF audio connection is made, both
speakers will shine blue.
*Note: Recommended power installation
should include a 10 amp fuse between the
power source and speakers, ensure a proper
and adequate power connection is established.
Bluetooth Audio Connection:
I
Once the speakers are installed and powered
to the primary speaker system - these
supplemental speaker allow you to stream and
expand the connected Bluetooth streaming audio.
Aux-in (External Audio Source) Connection:
I I
Once the speakers are installed and powered to the primary speaker system -- these supplemental
speaker allow you to stream and expand the connected aux/external input streaming audio.
*Note: The speaker system must not be paired via Bluetooth wireless connection to allow Aux-in
audio mode.
Passive Speaker Connection:
I I I
Each speaker also has the ability to be used as a Passive-Type (un-powered) speaker. Ensure a proper
audio source connection is made via each speaker's 'Input Radio Speakers' connectors.
2nd Speaker (L Channel)
RED
RED
BLUE
BLUE
BLUE
BLUE
BLUE
BLUE
PLMRF65MB / PLMRF65MW
(Primary Speaker System -- Sold Separately)
L CHANNEL
R CHANNEL
CH Set
PLMRF65SB / PLMRF65SW
(Supplemental Speaker System)
www.PyleUSA.com
CH Set
CH Set
Advertisement
