BMW k1200lt Manual page 43

3
2
OE
Illumination
Switch off the ignition before
changing a bulb.
Do not touch the glass of new
bulbs with your fingers. Use a
clean, dry cloth to hold the
bulbs when inserting them.
• Remove two screws 1
• Pull bulb holder 2 down out of
guard
OE
Optional equipment
4
• Pull protective cap 3 off bulb
• Push bulb 4 into its socket,
• Installation is the reverse of
Check that the protective cap is
correctly seated
The procedure is the same for
removing and installing the right
and left bulbs.
– Illumination bulb: 12 V 6 W
Changing bulbs
1
housing
turn it counter-clockwise and
remove
the removal procedure
2
43