Page 2
• STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a ‘one stop shop’ for all your requirements. MANUFACTURED...
Page 3
The Fuse for this unit is a 10A Fuse. Make sure correct fuse is fitted in-line, close to the battery end of the RED (positive) wire. Failure to do so will result in damage to the unit. W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830...
Page 4
After several moments the calculated CAL value (e.g. C50) will be displayed and the controller is ready to use. Press enter to exit calibration. W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830...
Page 5
Press enter again to return to the current flow rate. NOTE: ‘ON’ keeps your battery protected. To turn the controller off, press the power button. W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830...
Page 6
An over current has been detected, the controller has shut down the pump to protect itself. Lower the flow rate and check the hose for blockages. W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830...
Page 7
Hamilton House, 8 Fairfax Road, Heathfield Industrial Estate, Newton Abbot Devon, TQ12 6UD United Kingdom Telephone: +44 (0) 1626 830 830 Email: sales@streamline.systems Visit www.streamline.systems...
Need help?
Do you have a question about the SFC05-09 and is the answer not in the manual?
Questions and answers