HANNspree HC284UFB User Manual page 15

LOW BLUE LIGHT
PICTURE QUALITY SETTING
SHARPNESS
RESPONSE TIME
SUPER RESOLUTION
BLACK LEVEL
DISPLAY
ASPECT RATIO
AUDIO
MUTE
VOLUME
AUDIO SOURCE
MULTI-WINDOW
MULTI-WINDOW
SUB WIN2 INPUT
PIP SIZE
PIP POSITION
SWAP
Select the 「Low Blue Light」 option to adjust the low blue light of
the display.
Select the「Sharpness」option to adjust the sharpness of the
display.
Setup the display response time through the response time
function. Available settings are Off/ High/ Middle/ Low.
Select the super resolution according to your preference: Off/
High/ Middle/ Low.
Select the「Black Level」option to adjust the black level of the
display.
Setup the aspect ratio of screen through the aspect ratio function.
Available settings are Wide Screen/ 4:3/ 1:1/ Auto.
Select the「Mute」option to switch the function On or Off.
Select the 「Volume」 option to change the volume level. Enter the
option and adjust the level.
● By high volume, risk of hearing damage exists.
While transferring via the PIP/ PBP, it can select the audio
source between DP or HDMI.
Select the「Multi-Window」option to switch the PIP/ PBP
function.
Select 「 Sub Win2 Input」 option to change the input source of the
PIP/ PBP. Enter the option and select DP or HDMI (2.0).
Select「PIP Size」option to change the window size. Available
settings are Small/ Medium/ Large.
Select「PIP Position」option to change the window position.
Available settings are Top Left/ Bottom Left/ Top Right/ Bottom
Right.
Select「Swap」option to change the 1
15
User's Manual
st nd
and 2 window.