Page 2
CONGRATULATIONS ON YOUR NEW VUZIX SMART SWIM ™ SMART SWIM™ is a wearable Android-based swim accessory designed for monitoring and tracking swim performance and enhancing training. It has Wi-Fi connectivity and GPS right out of the box and includes: • SMART SWIM™ viewer •...
Charge battery before use with wall charger or similar USB power supply Can take up to two hours if the battery is fully empty. POWER ON Press Power Button Power on Smart Swim™ Dismiss Power Dialog Press Forward Button to scroll through dialog Press Select Button to dismiss power dialog...
Page 5
ASSEMBLING YOUR SMART SWIM™ SYSTEM – PART 1 The Smart Swim and goggles come preassembled for right dominant eye. The viewer should be worn on the dominant eye. The user can use as is, attach another pair of swim goggles or switch the viewer for left dominant eye use.
Page 6
ASSEMBLING YOUR SMART SWIM™ SYSTEM – PART 2 Assembled...
PAIR WITH BLUETOOTH DEVICE Scroll to and Open Settings: Select Blue Tooth Turn on Bluetooth Device Select Scan Verify Device Found Your blue tooth device is now ready and paired. The system will auto pair with the same device each time you reboot the system.
Page 12
ENABLE GPS LOCATION Scroll to and Open Settings: Select GPS-Location Check both GPS settings REGULATORY Note: Satellite connections will take as much as 7 to 10 minutes the first time you turn on your GPS connection. Connection time will be much shorter with successive connections in the future.
Page 13
1- Open Settings app. 2- Press Left Button 3- Press Select button a. You will see regulatory info. 4- To close, press “OK” button FCC and ISED Compliance This device complies with part 15 of the FCC Rules and with the Radio Standards Specifications (RSS) for licence-exempt transmitters/receivers of Innovation, Science and Economic Development Canada (ISED).
Need help?
Do you have a question about the SMART SWIM and is the answer not in the manual?
Questions and answers