Advertisement
MAINTENANCE
In general, Ziptrak
blinds should not require additional lubrication by the owner. However, in dusty and
®
seafront locations, approximately once a year you may wish to add lubricant to assist in the continued
smooth operation of the blind.
To apply, lower the blind all the way; evenly apply the spray in the groove between the spline and the track.
Do this for the front of the blind only, on both the left and right sides. After lubrication, open and close the
blind several times to evenly distribute the silicone spray within the track.
To preserve the appearance of your Ziptrak blinds regular cleaning is advised. Especially in coastal areas,
frequent washing is suggested to remove the environmental buildup of chlorides and sulphur compounds.
WARRANTY
Please contact your retailer to discuss their warranty period and inclusions. Ziptrak
24-month warranty of all the components on the Ziptrak
regarding the performance, operation or maintenance of your blind system, or require replacement parts, please
contact your retailer. Alternatively, contact Ziptrak
Your local Ziptrak
www.ziptrak.com.au
© Ziptrak Pty Ltd 2017. Ziptrak
You must use silicone spray, such as food grade Helmar H4000
customer support.
®
expert
®
Phone 1300 77 00 65
Registered Trade Mark of Ziptrak Pty Ltd. ( 100% Australian Owned ) . 20200825_09_AU
®
MATERIAL
SPLINE
TRACK
CHANNEL
outdoor system. If you have any questions or concerns
®
enquiry@ziptrak.com.au
It is very important
that you do not
use any oil based
lubricants such as
WD40, as they will
damage thev spline
tape and clog the
dust that may be
within the track.
®
provides retailers with a
Advertisement
