Advertisement
UFI Pico Sell V1.5 Ethernet Gateway LoRa indoor
Note: if you have bought this Gateway through our ThingPark Dev IoT Store or ThingPark
Market, this Gateway is already pre-configured with ThingPark Dev1 LRR. You do not need to
flash the Gateway. If not, please follow up the instruction given inside the FAQ section of the
developer portal.
The gateway comes with DHCP enable and port 21, 22 and 2404 need to be open on your
firewall
①
UNBOX THE GATEWAY
To unbox your Gateway :
1. Check that all the following devices are in the box
2. Take an Ethernet Cable (not provided)
EU 868
Installation Guide
1
Advertisement
Table of Contents
Summary of Contents for Actility ThingPark Partner
- Page 1 UFI Pico Sell V1.5 Ethernet Gateway LoRa indoor EU 868 Installation Guide Note: if you have bought this Gateway through our ThingPark Dev IoT Store or ThingPark Market, this Gateway is already pre-configured with ThingPark Dev1 LRR. You do not need to flash the Gateway.
- Page 2 ThingPark Partner - UFI Space GW Picocell V1.5 installation Guide V1.0 ② CONNECT THE GATEWAY To connect your gateway: 1. Screw the antenna 2. Plug the Ethernet Cable & Connect it to your Internet network 3. Plug the Power Supply & plug it into the socket ③...
- Page 3 10. Fill out the fields as follows : o LRR ID: Identification of the base station -> Enter the last BS ID 8 hexadecimal digits o Model = Gateway model -> Select “UfiSpace gateway picocell V1.5” o SMN: Serial Number -> Enter 0000-XX-0000-0000 as SMN (do not copy and paste from the user guide).
- Page 4 Actility, ThingPark, are registered trademarks of Actility SA or its subsidiaries may also be registered in other countries. Other denoted product names of Actility SA or other companies may be trademarks or registered trademarks of Actility SA or its subsidiaries, or their respective owners.
Need help?
Do you have a question about the ThingPark Partner and is the answer not in the manual?
Questions and answers