Panasonic NA-128VB6WAE Service Manual page 36

11.4. Valve
Valve is an electrical and mechanical component which is
designed to take water from the network system into the
washining machine. It is operated by PCB card.
Nominal voltage
Nominal power
Frequency
Check the resistance value on the component with multimeter as shown below. Valve water flow rate should be between
You can determine the resistance value of the main wash valve by measuring from the large socket which has one blue, one
black and two white cables as shown in the figure below (refers X5 on the wiring diagram). Each valve coil resistance values
Technical features
220-240 V
8 VA
50-60 Hz
Testing component
6 - 8 L/min. Each valve coil resistance values should be between 3.3 - 4.2 k
should be between 3.3 - 4.2 kohm.
Rated flow
Operating water pressure
Component test
36
7 L/min (±15 %)
0.02 - 1 Mpa