Download Print this page

UMS SMARTFIELD Installation Manual page 12

Lysimeter

Advertisement

Bodensäule präparieren
Finishing the soil column
 Spanngurt entfernen.
 Überschüssigen Boden an der Lysimeter-Unterseite mit Messer
überkreuz einschneiden.
 Überschüssigen Boden abheben und nicht nicht verschmieren, da dies
den Wasserfluß beeinträchtigt. Bodenfläche muss exakt eben sein!
Remove tie down.
 With a knife score crosswise the surplus soil on the bottom of the lysimeter.
 Cut surplus soil off. Make sure you do not smear
a negative impact on the water flow. Bottom area must plane!
7
(daub?)
the soil as this has

Advertisement

loading

Related Products for UMS SMARTFIELD