Interfaces
Ethernet SFP28 and QSFP28 Interfaces
The network ports of the ConnectX®-5 adapter card are compliant with the IEEE 802.3 Ethernet
standards listed
in Features and
connectors on the adapter card.
The adapter card includes special circuits to protect from ESD shocks to the card/server when
plugging copper cables.
PCI Express Interface
The table below describes the supported PCIe interface in ConnectX-5 and ConnectX-5 Ex adapter
cards.
IC Model
ConnectX-5
ConnectX-5 Ex
LED Interface
There are two I/O LEDs, LED0 and LED1, per port to indicate speed and link status. LED0 is a bicolor
(yellow and green) LED and LED1 is a single color (green) LED.
Link Indications
LED and State
1Hz blinking Yellow
Benefits. Ethernet traffic is transmitted through the SFP28/QSFP28
Supported PCIe Interface
PCIe Gen 3.0 (1.1 and 2.0 compatible)
through x16 edge connectors
PCIe Gen 3.0/4.0 (1.1 and 2.0 compatible)
through x16 edge connectors
Beacon command for locating the adapter card
Features
Link Rates: 2.5. 5.0 or 8.0GT/s.
Auto Negotiation to: x16, x8, x4, x2 or
x1.
Support for MSI/MSI-X mechanisms.
Link Rates: 2.5. 5.0, 8.0 or 16.0GT/s.
Auto Negotiation to: x16, x8, x4, x2 or
x1.
Support for MSI/MSI-X mechanisms.
Description
14