Application Example; Installation - Behringer Virtube VT15CD User Manual

VIRTUBE VT30FX/VT15FX/VT15CD
3.

Application example

The VIRTUBE features plenty of connectors for a wealth of applica-
tions. Here's an example of how flexible your VIRTUBE can be:
Fig. 3.1: VT30FX standard set-up
For practising in the rehearsal room or at home, please wire your
VIRTUBE as shown in fig. 3.1. Connect a CD player or drum com-
puter to the CD IN input. If you want to practice with headphones,
connect your headphones to the LINE OUT/PHONES jack. The
built-in loudspeaker will be muted automatically. Connect the
dual footswitch supplied with the unit to the FOOTSWITCH jack
on the VIRTUBE. The CHANNEL footswitch switches between
the channels. The IN/OUT footswitch turns the effect on and off
(VT30FX only).
6
4.

Installation

Except for the INPUT jack (1/4" TS), all audio inputs and outputs
of the BEHRINGER VIRTUBE are on 1/4" TRS connectors. Please
see Chapter 5, "Specifications" for more information.
Please ensure that the unit is installed and operated
+
only by people qualified to do so. During installation
and operation the user must have sufficient electrical
contact to earth. Electrostatic discharge may affect the
operation of the unit.
Fig. 4.1:
Fig. 4.2: 1/4" TRS connector
Fig. 4.3: Stereo adapter cable
Fig. 4.4: Mono adapter cable
Installation
1/4" TS connector