ASSEMBLY INSTRUCTIONS CHARGING INSTRUCTIONS 1 Secure the steerer tube and flick the 2 Install the handlebar kickstand down 1 open the rubber plug 2 Insert the charging plug, when light on charger turns from red to green the scooter is fully charged. 3 Tighten the rubber plug after charging finished.
RIDING SAFETY SCOOTER MAINTENANCE Riding electric scooters is dangerous. Always wear safety gear such as a Cleaning and Storage helmet and knee / elbow pads when riding. Obey the laws in your area and be courteous to other road users and pedestrians. 1 Use a soft cloth to clean the scooter.
1 Check the battery indicator 3 When the electric scooter slides, move FOLDING AND CARRYING your other foot on the pedal and stay steady. Then gently hit the throttle (at than 3km/h speed) FOLD: 2 Stand on the pedal with one foot, and push the other foot backward 4 To slow down, you can release the...
9 Damage to the scooter caused by natural disaster or irresistible force. Proof of purchase is required for any warranty claim. All warranties should go through the retailer where you purchased the product. For further information on the e-Glide warranty and product care, please visit www.e-glide.com.au/warranty...
GUARANTEE CARD SPECIFICATIONS START DATE OF WARRANTY EXTENSION (DD/MM/YY) Specifications Charger START DATE OF WARRANTY EXTENSION (DD/MM/YY) L x W x H (mm) 1130 x 500 x 1150mm Rated Current (A) Dimensions START DATE OF WARRANTY EXTENSION (DD/MM/YY) Folded L x W x H (mm) 1130 x 500 x 480mm CCC, ROHS Weight...
Need help?
Do you have a question about the D 150 and is the answer not in the manual?
Questions and answers
How to get d150 to pairing mode