Advertisement
Before the first time you use your Wireless Charging Alarm Clock
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Operating Instructions
Powering up your Wireless Charging Alarm Clock
1. Insert the USB C-Type Plug (11) of the USB Power cable (10) into the Type-C Power Input Socket (9)
on the rear of the Alarm Clock.
2. Insert the large USB plug on the other end of the USB Power Cable (10) into a suitable USB supply
rated between 5 volts 2 amp and 9 volts 1.67A.
Using Your Wireless Charging Alarm Clock
12 or 24 Hour Mode
1. Press the M button (7) twice to toggle between 12-hour or 24-hour mode, the LED Display (1) will
flash '12H' or '24H' to confirm the mode selected.
Setting the Time
1. Press the M button (7) briefly once and the minutes will flash. Press the + & - buttons (6) to set the
minutes.
2. Press the M button (7) briefly once more. Press the + & - buttons (6) to set the hour.
NB whilst setting the time in 12-hour mode, ensure the AM and PM indicators on the LCD Display (1)
light according to the time set.
Setting the Alarm Time
1. Press and hold the M button (7) for 3 seconds and the minutes will flash. Press the + & - buttons (6)
to set the alarm minutes.
2. Press the M button (7) briefly. Press the + & - buttons (6) to set the alarm hour.
NB whilst setting the time in 12-hour mode, ensure the AM and PM indicators on the LCD Display (1)
light according to the time set.
Setting and Unsetting the Alarm
1. Press and hold the '+' button (6) for 3 seconds to set the alarm. The Alarm icon
of the LED Display (1) will light.
2. Press and hold the '
centre of the LED Display (1) will go out.
Silencing the Alarm
1. After the alarm has sounded simply tap the unit to silence the alarm. The alarm will go into a 5
minute 'snooze' period and the alarm icon
buttons (6) to cancel the alarm.
2. After the alarm has sounded after the snooze period, tap the unit again to silence the alarm for
another 5 minute snooze period and the alarm icon
'+' buttons (6) to cancel the alarm.
-
' button (6) for 3 seconds to unset the alarm. The Alarm icon
will flash - alternatively briefly press the '-' or '+'
will flash - alternatively briefly press the '-' or
at the lower centre
at the lower
4
Advertisement
