Sleep" Function - Oceanic OCEACLIM140W1 User Manual

-Allows to program a timer on of the air conditioner.
When the appliance is off, press the button once
decrease to select the desired number of hours before the unit will turn on
automatically.
6.
OSCILLATION FUNCTION: (Activate only by remote control)
When the appliance is on, the deflactor opens fully. Press the
OSCILLATION button(OSCIL) of the remote control to start the
automatic oscillation function. The deflector will tilt up down
automatically.
NOTE: Do not adjust the deflector manually.
.
7.
CONTROLLER SLEEP FUNCTION : (Activate only by remote control)
Sleep function (Can only be used in air conditioning mode)
-To activate the SLEEP function, press SOMM (Sleep) of the remote control. The
corresponding LED will light. Ventilation is automatically set at low speed.
-In COOLING mode, after the first hour of operation, the temperature automatically
increases by 1 °C above the set temperature then rise by 1 °C after one hour additional.
This temperature is maintained throughout the duration of operation.
-In HEATING mode, after the first hour of operation, the temperature is automatically
reduced by 1 °C with respect to the set temperature then decrease by 1 °C after one hour
additional. This new temperature will be maintained throughout the duration of operation.
as well as increase
66
and