Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
Head Office
62 Parkhurst Drive
Knoxfield VIC 3180
T: 03 9887 2131
SF MEDIA FILTER INSTALLATION AND OPERATION MANUAL
New South Wales
Unit 1, 20-22 Foundry Road
Seven Hills NSW 2147
T: 02 9838 0000
SF MEDIA FILTER
Queensland
Unit 4, 8 Reichert Drive
Molendinar QLD 4214
T: 07 5679 6821
info@oasisaquatics.com.au
oasisaquatics.com.au
info@oasisaquatics.com.au
oasisaquatics.com.au
1
Advertisement
Table of Contents
Summary of Contents for Oasis Aquatics SF24-40
- Page 1 SF MEDIA FILTER INSTALLATION AND OPERATION MANUAL Head Office New South Wales Queensland 62 Parkhurst Drive Unit 1, 20-22 Foundry Road Unit 4, 8 Reichert Drive info@oasisaquatics.com.au Knoxfield VIC 3180 Seven Hills NSW 2147 Molendinar QLD 4214 oasisaquatics.com.au T: 03 9887 2131 T: 02 9838 0000 T: 07 5679 6821 SF MEDIA FILTER INSTALLATION AND OPERATION MANUAL...
- Page 2 PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING. Please pass these instructions on to the owner of this equipment. SF24-40 SF24-50 SF28-50 SF31-50 SF MEDIA FILTER INSTALLATION AND OPERATION MANUAL info@oasisaquatics.com.au oasisaquatics.com.au...
- Page 3 CONGRATULATIONS ON PURCHASING YOUR OASIS SF MEDIA FILTER. THIS MANUAL HAS BEEN CAREFULLY DEVELOPED TO GIVE YOU ALL THE INFORMATION YOU NEED TO GET THE BEST VALUE FROM YOUR PURCHASE. It is important that you read through the manual to identify the key areas you need to understand, particularly the following: •...
-
Page 4: Important Warnings
WE CARE ABOUT YOUR SAFETY IMPORTANT WARNINGS Warning – read and follow all instructions in this owners manual and on the equipment. Failure to follow instructions can cause severe injury and/or death. Oasis highly recommend the installation of all their equipment by a suitably qualified pool professional who will ensure your high performance Oasis products are installed to your local standards and codes to ensure optimum safety and performance. - Page 5 WE WANT YOU TO BE DELIGHTED WITH YOUR PURCHASE, CORRECT INSTALLATION WILL PROLONG LIFE AND MAXIMISE THE PERFORMANCE OF THIS UNIT. Your filter is high performance and corrosion proof designed with superior flow characteristics that is easy to operate. Everything is made simple from installation, operation, to the maintenance of the filter.
-
Page 6: Specifications And Dimensions
SPECIFICATIONS AND DIMENSIONS Model # SF24-40 SF24-50 SF28-50 SF31-50 Filtration Area (m 0.28 0.28 0.36 0.47 Max Flow Rate (litres pm) Turnover Capacity – 8 Hours 120,000 153,600 168,000 192,000 (Litres) Turnover Capacity – 8 Hours 31,680 40,320 44,160 50,400... -
Page 7: Installation
INSTALLATION The Filter should be installed as close to the pool as possible but keep a distance of at least 1.5m. Locate the Filter on rigid, level surface, preferably in a dry, shaded, and well-ventilated area. Prior to installation take into consideration the following conditions: •... - Page 8 It is also highly recommended to use minimum 40mm (1.5”) PVC Pipe with the SF24-40 Filter and minimum 50mm (2.0”) PVC Pipe with all other SF Filters. To reduce any pressure to provide the best clean possible reduce the distance and amount of bends used for the WASTE discharge line.
-
Page 9: Start-Up Procedure
START-UP PROCEDURE Be sure the correct amount of filter sand media is in the tank and all connections have been made and are secure. Turn the Multiport Control Valve handle to the “Backwash” position. Press the handle downward before turning. Start the pump according to pump instruction manual (be sure all suction and return lines are open). - Page 10 MULTIPORT CONTROL VALVE FUNCTIONS The Multiport Control Valve controls the direction of water flow throughout your filter allowing you to easily filter your swimming pool water and then clean your filter tank. Correct operation of the Multiport Control Valve will give you healthy, clean water for many years. It is important to understand the functions of each setting which is explained below.
- Page 11 6) CLOSED Closed setting acts like a Valve and prevents flow of water through the Tank, particularly useful if doing any maintenance on the filtration system. BACKWASHING YOUR FILTER Cleaning your Filter will give you the best quality swimming water that is clean, clear and safe for swimming.
- Page 12 WARNING Cleaning the Sand Filter by BACKWASHING and RINSING is essential to providing clean, safe and healthy swimming water. A regular cleaning program is highly recommended especially in Commercial applications, the time between cleans and length of cleaning time will depend on size of pool, bather load and other environmental conditions.
-
Page 13: Troubleshooting
TROUBLESHOOTING The chart below identifies some of the main issues you may encountered with your sand filter. This should assist with the majority of problems. OASIS highly recommends regular checks and maintenance of your swimming pool equipment by a qualified pool professional. This will extend the life of your equipment and give you the best performance. - Page 14 • Leak inside Control Valve Abnormal Loss of Pool Water • Leak from Pool or PVC Piping • Filter requires Backwashing High Pressure Filter • Calcified Sand Bed due to poor water chemistry • Return lines too small for flow rate of Pump •...
- Page 15 PRO-ACTIVE MAINTENANCE PROGRAM Like your motor vehicle it is important to maintain a regular service program for your pool equipment to ensure the best operation and long lasting results. The below chart provides a guideline to follow to best look after your valuable equipment. Regular maintenance can identify any potential issues early and save on expensive maintenance at a later date WHAT ARE YOU LOOKING...
- Page 16 REPLACEMENT PARTS OF FILTER Key No Part No Description 88281550B 6 Way 1.5” Valve with 1.5” union set x3 pressure gauge 88281551B 6 Way 2” Valve with 2” union set x3 pressure gauge 06021013 Plastic Pressure Gauge with O Ring 01111048 Connector for Pressure Gauge / Stopper 89280102B...
-
Page 17: Warranty
Company of such defect within fourteen (14) days from the date of your purchase. If a defect in materials or workmanship occurs within the warranty period Oasis Aquatics will, at its discretion repair or replace product or the defective part of the product free of charge or cause the product or the defective part to be repaired or replaced by an Authorised Oasis Aquatics Service Agent free of charge. - Page 18 Authorised Oasis Aquatics Service Agent, a service technician travelling fee will apply. If no defect in materials or workmanship is found, a fee must be paid for Oasis Aquatics’s costs of service, diagnosis and testing. If such a circumstance you request that Oasis Aquatics or Authorised Service Agent complete the non-warrantable repair, a fee will apply for labour and parts used to repair the product.
- Page 19 Oasis Aquatics shall have no liability for incidental or consequential damages or delays caused either directly or indirectly by any malfunction, defect or failure of the equipment. No person is authorized to make any representation or warranty on behalf of Oasis Aquatics without express written consent from Oasis Aquatics.
- Page 20 A part of the group Victoria New South Wales Queensland 62 Parkhurst Drive Unit 1, 20-22 Foundry Road Unit 4, 8 Reichert Drive Knoxfield VIC 3180 Seven Hills NSW 2147 Molendinar QLD 4214 Australia Australia Australia T: 03 9887 2131 T: 02 9838 0000 T: 07 5679 6821 oasisaquatics.com.au...
Need help?
Do you have a question about the SF24-40 and is the answer not in the manual?
Questions and answers