Relaxxnow VTX450 Manual page 33

13. TROUBLESHOOTING
If the fan stops working, please follow these steps before contacting customer service:
PROBLEM
The fan does not turn on.
The fan has stopped sud-
denly.
The oscillation function does
not work.
The fan is on, but the air
power is not strong enough.
The remote control
does not work.
POSSIBLE CAUSE
Fan is not connected
Plug it into the appropriate outlet and turn it
to a 220-240V AC,
on again.
50/60 Hz outlet.
The timer has expi-
Make sure all the timer lights on the control
red and the fan has
switch are off. When one of the lights is lit,
switched off automa-
press the „Timer" button until all LEDs are off.
tically.
Make sure that the corresponding Oscillating
The oscillation func-
function LED is lit. If not, press the button to
tion was not switched
start the function. This can also be done while
on.
the fan is in operation.
Turn off the fan and pull out the plug. Clean
Dust has collected on
the rear grille with a soft, dry cloth. Plug in the
the back of the fan.
plug and turn it back on.
The batteries are too
weak. Follow the operation of the remote control and
The remote is too the guidelines for using the remote control
far away from the batteries.
device.
SOLUTION
RELA NOW 33