Advertisement
Quick Links
Safety Precatutions:
§
Installation, initial start-up and maintenance may only be performed by trained personnel! All applicable
European and national regulations regarding installation of electrical equipment must be adhered to.
The device may only be connected to supply power which complies with the specifications included in the
§
technical data and on the serial plate!
§
The device must be disconnected from all sources of power during installation and maintenance work!
§
The devices may only be operated under the conditions specified in their operating instructions!
Installation / Mounting:
1. Open connection head, remove cable tie and circuit board.
2. Feed the sensor cable from below into the connection head through the cable gland
BAMONIV TPS
3. Attach cable tie to the sensor cable for strain relief
Tel. +33 (0)1 30 25 83 32 ▪ Fax: +33 (0)1 34 10 16 05 ▪ www.bamo.eu ▪ info@bamo.eu
590 msa590-04 SU3733-1.doc 07/18
BAMONIV TPS
FOR
BAMO Mesures SAS ▪ 22, Rue de la Voie des Bans ▪ 95100 ARGENTEUIL
W
IRING INSTRUCTIONS
NIVAPRESS SGE 25
OR
NIVAPRESS SGE 25
BJSC
TO CONNECTION HEAD
1
Advertisement
Summary of Contents for Bamo NIVAPRESS SGE 25
- Page 1 3. Attach cable tie to the sensor cable for strain relief BAMO Mesures SAS ▪ 22, Rue de la Voie des Bans ▪ 95100 ARGENTEUIL Tel. +33 (0)1 30 25 83 32 ▪ Fax: +33 (0)1 34 10 16 05 ▪ www.bamo.eu ▪ info@bamo.eu 590 msa590-04 SU3733-1.doc 07/18...
- Page 2 Tighten the cable tie with a suitable tool BAMO Mesures SAS ▪ 22, Rue de la Voie des Bans ▪ 95100 ARGENTEUIL Tel. +33 (0)1 30 25 83 32 ▪ Fax: +33 (0)1 34 10 16 05 ▪ www.bamo.eu ▪ info@bamo.eu 590 msa590-04 SU3733-1.doc 07/18...
- Page 3 8. Insert cable for your process via the cable gland. BAMO Mesures SAS ▪ 22, Rue de la Voie des Bans ▪ 95100 ARGENTEUIL Tel. +33 (0)1 30 25 83 32 ▪ Fax: +33 (0)1 34 10 16 05 ▪ www.bamo.eu ▪ info@bamo.eu 590 msa590-04 SU3733-1.doc 07/18...
- Page 4 The connection is complete - connection head and probe can be mounted BAMO Mesures SAS ▪ 22, Rue de la Voie des Bans ▪ 95100 ARGENTEUIL Tel. +33 (0)1 30 25 83 32 ▪ Fax: +33 (0)1 34 10 16 05 ▪ www.bamo.eu ▪ info@bamo.eu 590 msa590-04 SU3733-1.doc 07/18...