Prima Klima COOL TUBE Assembly Instruction

Assembly instruction for air cooled reflector
L2010, L2015, L2020
Thank you for choosing our product. Please follow the instructions in the cabling and assembling
guide carefully. Firstly, check if all pieces are provided. We advise that the connections of the
electro equipment must be done by professionals.
Application:
The Cooltube is an air cooled reflector for high pressure lamps. L2010 and L2015 are designed
for 250, 400 and 600 Watt lamps. L2020 is optimal for 1000W lamps.
The Cooltube is highly efficient when used in CO2 rooms or grow boxes and tents. For optimal
cooling effect the airflow must be as cool as possible.
Dust can be a major issue in light loss, therefore, we recommend that a carbon filter is attached
to the start of the airflow. Furthermore, the inside and the outside of the glass must be cleaned
from time to time.
The airflow could potentially surpass 50°C, if, you connect several cooltubes in a series.
To prevent this issue just connect the Cooltubes parallely by simply using a T-piece.