Summary of Contents for Teknik 5420285
- Page 1 Teknik www.teknikoffice.co.uk Get all organized and stuff . Storage Stand Hampstead Park Collection | Model 5420285 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-24 Hammer Not actual size Français 25-28 Español 29-32 Skip the power trip. Safety 33-34 This time. Warranty Page 2...
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. LEFT LARGE RIGHT END (1) BACK (1)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. RIGHT CABINET AA EXTENSION RAIL - 2 BB EXTENSION SLIDE - 2 RAIL - 1 (EXTENSION SET SHOWN SEPARATED) LEFT CABINET RIGHT DRAWER LEFT DRAWER RAIL - 1 SLIDE - 1...
- Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å Caution carton to avoid scratching your unit or the fl oor. This unit is not intended for Push thiirty-two LARGE HIDDEN CAMS (1) into the TOP (C), å...
- Page 6 Step 2 å Turn thirty-two ANGLED HEAD CAM SCREWS (3) into the ENDS (A and B), UPPER BACK (D), BOTTOMS (H AND I), and LEGS (L and M). Angled head (32 used) Remember: Righty tighty. Lefty loosey. Page 6...
- Page 7 Step 3 Push twenty-eight LARGE WOOD DOWELS (5) into å the edges of the TOP (C), UPPER BACK (D), SHELF (E), LOWER BACK (G), BOTTOMS (H and I), BRACES (K), and LEGS (L and M). Push four SMALL WOOD DOWELS (6) into the LEGS (L and M). å...
- Page 8 Step 4 Fasten the TOP (C) to the UPPER BACK (D). Tighten two å LARGE HIDDEN CAMS. NOTE: Be sure the LARGE WOOD DOWEL in the TOP å inserts into the hole in the UPPER BACK. D E N H I D i t h f a c S u r...
- Page 9 Step 5 Fasten the SHELF (E) to the UPPER BACK (D). Use two å BLACK 1-1/2" FLAT HEAD SCREWS (15). NOTE: Be sure the LARGE WOOD DOWEL in the UPPER å BACK inserts into the hole in the SHELF. D E N H I D i t h f a c...
- Page 10 Step 6 Fasten the FEET (L and M) to the BOTTOM BRACES (K). å Tighten four LARGE HIDDEN CAMS. NOTE: Be sure the LARGE WOOD DOWELS in the å BRACES insert into the holes in the LEGS. Fasten a LEG/BRACE assembly to the FRONT BOTTOM (H). å...
- Page 11 Step 7 Separate the EXTENSION SLIDES (BB) from the EXTENSION RAILS (AA) as shown in the enlarged diagram below. Be å prepared, the parts are greasy. Fasten an EXTENSION RAIL (AA) to the LEFT END (B). Use three BLACK 1/2" PAN HEAD SCREWS (17). å...
- Page 12 Step 8 Fasten the EXTENSION RAIL (AA) to the RIGHT END (A). Use three BLACK 1/2" PAN HEAD SCREWS (17). å NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner å...
- Page 13 Step 9 NOTE: When fastening parts to each other, be sure the LONG and SHORT WOOD DOWELS insert into the holes of the å adjoining parts. Fasten the FRONT BOTTOM (H) to the LEFT END (B). Tighten the LARGE HIDDEN CAM. å...
- Page 14 Step 10 Fasten the RIGHT END (A) to the TOP (C), UPPER å BACK (D), SHELF (E), DRAWER BRACE (F), LOWER BACK (G), and BOTTOMS (H and I). Tighten eight LARGE HIDDEN CAMS. NOTE: Be sure the LONG and SHORT WOOD DOWELS in å...
- Page 15 Step 11 Carefully turn your unit over onto its front edges. Unfold å the BACK (J) and lay it over your unit. Side Step: Make nachos. (Optional, but Make equal margins along all three edges of the BACK (J). Push å...
- Page 16 Step 12 Turn twelve STRAIGHT HEAD CAM SCREWS (4) into the å DRAWER FRONTS (U and V). Push twelve SMALL HIDDEN CAMS (2) into the large holes in å the DRAWER SIDES (N, P, Q and R) and DRAWER BRACES (T). Straight head (12 used) Arrow...
- Page 17 Step 13 Fasten the RIGHT DRAWER SLIDE (EE) to the RIGHT SMALL å DRAWER SIDE (P) and the LEFT DRAWER SLIDE (FF) to the LEFT SMALL DRAWER SIDE (N). Use six BLACK 1/2" FLAT HEAD SCREWS (18). BLACK 1/2" FLAT HEAD SCREW (6 used in this step) Roller end Roller end...
- Page 18 Step 14 f a c s u r n i s h U n fi Groove Slide a DRAWER BOTTOM (W) into the grooves å Fasten the SMALL DRAWER SIDES (N and P) and å in the DRAWER SIDES (N and P) and SMALL DRAWER BRACE (T) to the SMALL DRAWER FRONT (U).
- Page 19 Step 15 Fasten the EXTENSION SLIDES (BB) to the LARGE DRAWER å SIDES (Q and S). Use six BLACK 1/2" PAN HEAD SCREWS (17). BLACK 1/2" PAN HEAD SCREW (6 used in this step) Open end These holes must be here. Page 19...
- Page 20 Step 16 Groove Slide a DRAWER BOTTOM (W) into the grooves å Fasten the LARGE DRAWER SIDES (Q and S) and å in the LARGE DRAWER SIDES (Q and S) and LARGE DRAWER BRACE (T) to the LARGE DRAWER FRONT (V). DRAWER FRONT (V).
- Page 21 Step 17 Fasten the KNOBS (10) to the DRAWER FRONTS (U and V). å Use two BLACK 7/8" MACHINE SCREWS (16). Fasten the FRONT FILE GLIDE (13) to the LARGE DRAWER å FRONT (V). Use four BLACK 1/2" PAN HEAD SCREWS (17). BLACK 1/2"...
- Page 22 Step 18 Push the LONG FILE GLIDE (11) onto the LARGE DRAWER å BACK (R) as shown in the upper diagram. Push the SHORT FILE GLIDES (12) onto the LARGE å DRAWER SIDES (Q and S) as shown in the upper diagram. Push the FILE HANGERS (14) onto the FRONT FILE å...
- Page 23 Step 19 Carefully stand your unit upright. å Pro Tip: Lift with your To insert the small drawer into your unit, tip the front å legs. And, you know, of the drawer down and drop the rollers on the drawer your arms.
- Page 24 Step 20 Push the GROMMET (8) into the large hole in the å UPPER BACK (D). Peel an APPLIQUE from the APPLIQUE CARD (7) and å stick them onto each HIDDEN CAM. NOTE: Please read the back pages of the instruction å...
- Page 25 CAUTION Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded fi le cabinet drawers. •...
Need help?
Do you have a question about the 5420285 and is the answer not in the manual?
Questions and answers