Samsung Galaxy Buds Pro SM-R190 User Manual page 18

Using the earbuds
• If the earbuds do not connect to a mobile device within three minutes, Bluetooth
pairing mode will be deactivated. Close the charging case again and open it. The
earbuds will enter Bluetooth pairing mode.
• If you want to connect to another mobile device after a connection has been
established, refer to
previous mobile
• When connecting earbuds with a mobile device that has been signed in to a
Samsung account, the earbuds pairing information will be synced on the other
mobile devices that use the same Samsung account and you do not need to pair
them at the beginning again. To connect the other devices that use the same
Samsung account with the earbuds, on the mobile devices that you want to connect,
launch the Settings app, tap Connections → Bluetooth, and then select the
earbuds synced through the Samsung account.
• If only a single earbud is connected to your mobile device, you will hear the sound in
mono. It will automatically switch to stereo mode when both earbuds are connected
to your mobile device.
• If the earbuds do not connect to a mobile device, the connection pop-up window
does not appear, or your mobile device cannot find the earbuds, touch and hold
both earbuds for more than three seconds while wearing them to enter Bluetooth
pairing mode manually. When Bluetooth pairing mode is entered, you will hear a
sound. However, you cannot use this method when you are playing music after
setting the volume adjustment as a preset touch-and-hold feature.
Connecting with other devices after disconnecting from the
device.
18