Advertisement
Advertisement
Table of Contents
Related Manuals for Yeelight YLTD003
Summary of Contents for Yeelight YLTD003
- Page 1 Yeelight Display Hanging Lamp Pro User Manual...
-
Page 2: Product Description
Product Description Please read this manual carefully before use and keep it properly. Main light area Power contact point Lamp body (bottom view) Ambient light area Power contact point Power contact point... - Page 3 Type-C power interface Power contact point Fixed card slot Base Push-type knob USB power cord Remote control Note: The illustrations for the product, accessories and user interface in the manual are all schematic diagrams for reference only. Due to updates and upgrades of the product, the actual product may be slightly different from that shown in the schematic diagram, and the actual product shall govern.
-
Page 4: Installation And Use
Installation and Use 1. Install the light bar: With the main light area facing downward, connect the power contact point of the lamp body to that of the base; Place the base in the middle of the upper part of the display to fasten the fixing buckle to the display screen, with the lower part of the base holding up the back of the display (please remove the protective film from the base surface when placing the base);... -
Page 5: Install The Remote Control Battery
2. Install the remote control battery Hold the bottom edge of the remote control with one hand, press the bottom anti-skid pad with the other hand and rotate counterclock- wise to open the back cover of the remote control. Install two AAA batteries according to the markings indicating positive and negative terminals of the battery compartment. -
Page 6: Power Supply
Do not connect the power contact point of the lamp body or base to other metal conductors, otherwise it may cause damage or other hazards to the product. The original power cord is a dedicated accessory for Yeelight display hanging lamp, and cannot be used for fast charging or data transmission for other devices. -
Page 7: Light Control
Light control Press lightly Press and hold Rotate clockwise Rotate counterclockwise Front light brightness + Front light brightness - Front light on and off Ambient light on and off Press and rotate Press and rotate clockwise counterclockwise Double click Front light color Front light color Mode switching temperature +... -
Page 8: Specifications
Specifications Model: YLTD003 Supported operating systems: Android 4.4 or iOS 9.0 and later Connectivity: Wi-Fi IEEE 802.11 b/n/g 2.4GHz Rated power: 10W (80×0.2W/LED module+40×0.2W/LED module) Operating humidity: 0%—85%RH Color rendering index: Ra95 Lamp body size: φ23.0 × 485.5mm Remote control size: φ66.5×34mm... - Page 9 Notes This product comes with no adapter. Please use a 5V adapter with power greater than or equal to 10W for power supply, otherwise the product will not work. A remote control can control multiple hanging lamps, but a hanging lamp can only be controlled by one remote control. Please clean the product surface with a soft cotton cloth and do not clean it with corrosive solvent.
- Page 10 This product can be controlled on Yeelight App and be configured to interact with other Yeelight products. Download App Search for "Yeelight" in an App store or scan the QR code on the right to download and install the App. Add Device 1.
- Page 11 (Select Chroma-related components to complete installation) Download the Yeelight Chroma Connector plug-in at https://www2.razer.com/chroma-workshop-apps, and follow the tips for default installation. After installing, a Yeelight Chroma Connector shortcut icon is generated on the desktop. Double click to open the program;...
-
Page 12: Plug-In Features
The Yeelight Chroma Connector plug-in will automatically find devices within LAN that support Chroma linkage (the display hanging lamp is marked with lamp15-xxxx) Click on the [Disable] button in the device, and [Enable] displayed on the button indicates that the device has been turned on and accessed. - Page 13 Device List is used to indicate the number of devices; The top right corner area is used for turning pages;...
- Page 14 After setting the game parameters, go to [Settings] on the left to scan the device: 1. After the lamp is configured, turn on the third-party integration switch by going to Yeelight APP - [Device Settings] - [Third-Party Integration];...
- Page 16 Website: www.yeelight.com Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. Address: 10F-B4, Bldg. B, International Innovation Park, 169 Songling Rd., Laoshan District, Qingdao, China...
Need help?
Do you have a question about the YLTD003 and is the answer not in the manual?
Questions and answers