Advertisement
Operating Instructions
Bromic Butane Soldering Iron
SUITED TO D.I.Y SOLDERING
APPLICATIONS
BROMIC PRODUCT NO. 1811642
ASSEMBLE THE SOLDERING HEAD
Screw the spring loaded tip adapter to the soldering iron clockwise, then the soldering
head can be moved forward and backward.
Make sure the exhaust vent is upward to avoid the damage of tabletop.
Dissemble the Soldering tip by screwing the spring loaded tip adapter counterclockwise.
You may install various tips for different operations.
CAUTION:
When assembling, be aware of hot parts which may cause burning.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bromic Heating 1811642
Summary of Contents for Bromic Heating 1811642
- Page 1 Operating Instructions Bromic Butane Soldering Iron SUITED TO D.I.Y SOLDERING APPLICATIONS BROMIC PRODUCT NO. 1811642 ASSEMBLE THE SOLDERING HEAD Screw the spring loaded tip adapter to the soldering iron clockwise, then the soldering head can be moved forward and backward.
- Page 2 IGNITION Move the ON/OFF switch to the ON position to release the gas. Push the spring loaded adapter upwards to expose the burner head. Then light the gas with an open flame (e.g. lighter or match) by applying the flame to the ignition vent of the soldering tip.
- Page 3 WARNINGS Read and follow operating instructions and warnings and familiarize yourself with the torch before lighting or using. Review instructions and warnings periodically to maintain awareness. Keep the torch out of the reach of children. Extremely flammable contents under pressure. Maintain good ventilation.
- Page 4 ® BROM IC PLUMBING & GAS A member of the Bromic Group HEAD OFFICE 10 Phiney Placem Ingleburn NSW, 2565 Australia T: 1300 276 642 HEAD OFFICE NZ: 0508 276 642 10 Phiney Place, Ingleburn NSW 2565 Australia W: bromic.com/plumbing T T : : 1300 276 642 E: plumbing@bromic.com NZ : 05 08 276 642...
Need help?
Do you have a question about the 1811642 and is the answer not in the manual?
Questions and answers