Vision VFM-WA4X4B Quick Manual

Vision's Vision Flat-Panel Mount – Wall Arm range is tough and exible. The VFM-WA4X4B ts any at-panel LCD or LED
screen which has rear mounting holes up to 400 x 400 mm apart.
Black Flat-Panel Wall Arm 400×400
VFM-WA4X4B EU SAP: 4887531 US SAP: 13516850
vav.link/vfm-wa4x4b
Double-articulated wall mount for at panels that ranges from 37" to 60"
Reach 39-402 mm (1.5-15.8")
Up to 60"
Most medium-to-large displays use VESA 400 or similar mounting points, so the WA4X4 ts
the majority of displays up to this size. Note: if a larger display has the correct mounting points
and weighs less than the SWL this mount can support it safely.
Manoeuvrable
The single-arm design makes this mount especially exible without compromising the load
capacity of 20 kg (44.1 lb).
Fast Installation
The mounting plate xes to the back of the display, then just drop the display into place on the
wall arm and lock in place with a single nut.
Rotation
Didn't x the wall plate perfectly plumb? No problem! 6° of rotation allow you to get the display
level easily once the display is in place.
Tilt and Swivel
-2-12° tilt and 90° swivel. Use this mount to x a display in a corner up high in a waiting room.
Or x displays around an o ce or in meeting rooms.
VESA
The VESA system de nes how far apart the mounting holes are on the back of your at-panel.
Holes 400 x 400 mm apart are known as VESA 400 and will suit this mount. This product also
ts displays with smaller VESA sizes listed below.
Cable Management
Clip-on covers allow tidy cable routing.
Thumbscrews
Thumbscrews are used to x the display to help speed up the installation of this mount.