Advertisement
Available languages
Available languages
Table of Contents
Instruction Manual for DC-drive Vari-focal lenses
GD-LD-AC2812DC-IR
GD-LD-AC0550DC-IR
The auto-iris vario lenses are designed for 1/3" format cameras. Please use cameras with this
sensor size only to get the best performance. The lenses are CS-Monut lenses and can be
used with CS-Mount cameras only.
The lens is equipped with an auto iris mechanism by galvanometer that can be used with
only cameras containing amplifier. The 4-pin connector plug of the lens is applied to the end
of the cable.
Installation
Remove the protection caps from the camera and from the lens. Attach the lens to the
camera and screw it clockwise onto the camera until it stops. Connect the control cable of
the lens to the lens connector of the camera.
Note:
Do not touch the front or rear glass of the lens elements with your fingers.
UG-GD-LD-AC2812CS-IR-2018-11-08-V2-EN-DE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Grundig GD-LD-AC2812DC-IR
- Page 1 Instruction Manual for DC-drive Vari-focal lenses GD-LD-AC2812DC-IR GD-LD-AC0550DC-IR The auto-iris vario lenses are designed for 1/3“ format cameras. Please use cameras with this sensor size only to get the best performance. The lenses are CS-Monut lenses and can be used with CS-Mount cameras only.
- Page 2 Installationsanleitung für DC-gesteuerte Vario-Objektive GD-LD-AC2812DC-IR GD-LD-AC0550DC-IR Die Auto-Iris Vario-Objektive sind entworfen worden für 1/3“ Format Kameras. Bitte verwenden Sie nur Kameras mit diesem Sensorformat, um die beste Performance zu erhalten. Die Objektive sind CS-Mount Objektive und können nur für Kameras mit CS-Mount Anschluss verwendet werden.
Need help?
Do you have a question about the GD-LD-AC2812DC-IR and is the answer not in the manual?
Questions and answers