Advertisement
4.1.8.
Take up the slack in the webbing by pulling the extra webbing through the centre shaft, fig.6.
4.1.9.
Begin to ratchet tight, be sure to go 2 complete turns around the centre ratchet tightening shaft, fig.7.
warning! do not over tighten. the ratchet mechanism can damage or crush objects.
‰
4.1.10.
fold up all excess webbing in a bundle, place on the ratchet and bundle together with the double-sided hook and loop strap, fig.8.
4.2.
releasing
4.2.1.
Undo Velcro strap and remove bundle of excess webbing, fig.9.
4.2.2.
Pull back on the red release handle and then move the ratchet into the 180° open position, strap will unlock, fig.10.
4.2.3.
once strap is unlocked, if the webbing is still wrapped around the centre shaft, simply take hold of both pieces of webbing going
through the centre shaft and with a quick snapping action pull both ends and the centre shaft will return to normal 'ready to use'
position, fig.11.
4.2.4.
Return the switching latch back to the unlocked (sliding) position, fig.12.
4.2.5.
Remove the hooks, fig.13.
4.2.6.
Wrap the strap up and secure with the hook and loop bundling tie attached to the ratchet, fig.14.
fig.13
5. storage
5.1.
Always store in a dry place.
6. maintenance
6.1.
use a light duty oil on the gears and slides to keep the ratchet operating properly.
environment protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack sealey limited
fig.6
fig.9
fig.10
fig.14
01284 703534
Original Language Version
fig.7
fig.11
sales@sealey.co.uk
fig.8
fig.12
www.sealey.co.uk
td1202sr | issue:1 13/10/17
Advertisement
