Installation; Maintenance - Newa Pond J-LED 8 adv Instructions And Guarantee

Water fountain head with integrated led illumination
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
IMPORTANT SAFETY INSTRUCTIONS
This appliance is a lighting system for freshwater
ornamental outdoor ponds. Any other use is prohibited and,
consequently, not covered by the manufacturer's liability.
The LED-JET adv transformer complies with current safety
standards EN 61558-1 and EN 61558-2-6.
Warning: Strictly adhere to the following warnings in order
to prevent any type of accident: you should also observe
basic safety provisions.
1) WARNING: disconnect all submerged electrical
appliances in the pond before carrying out installation
and maintenance operations. If the connection plug or the
electric socket should be wet, disconnect the master switch
before pulling out the power supply cable.
2) WARNING: only use the supplied transformer or original
spare part.
3) Check that the voltage given on the appliance label
corresponds to the mains voltage.
4) Before connecting the appliance to the mains, check that
the cable and the appliance are not damaged in any way.
5) The power cable cannot be repaired or replaced. If it is
damaged, replace the entire appliance or the transformer.
6) The appliance power supply cable must form an appropriate
loop, facing downwards (DRIP LOOP), to prevent any
runoff water from coming into contact with the socket itself.
7) This appliance must be supplied through a residual
current dence (RCD) having a rated residual current not
exceeding 30mA (Idn ≤ 30 mA).
8) Do not place the supply cable underground, but follow the
installation instructions prescribed by the local regulations
in force, and consult a qualified installer and electrician.
9) When installing the appliance, do not use the supply
cable to lift it.
10) Before starting up the appliance, check that it has been
correctly installed.
11) Do not use or keep the appliance in an area subject to
freezing. In winter, it is necessary to remove and position
the appliance so that it is protected.
12) Avoid using corrosive or abrasive liquids when
operating these appliances.
13) WARNING: Before carrying out any maintenance on the
appliance, you must remove its plug from the electric socket.
14) WARNING:It is not a children's toy
15) WARNING: It is not suitable for use by children or
unskilled persons left unsupervised.
ONLY FOR UK: ADDITIONAL SAFETY INSTRUCTIONS
• This appliance is intended to be permanently connected to
the mains, other than by means of a plug and socket.
• A 3-amp fuse must be fitted in the supply circuit.
• A complete disconnection of all electrical poles must be made
possible. All wiring must be in accordance to Overvoltage
Category III conditions and to the local wiring rules.
• The wires in this main lead are coloured in accordance
with the following code: BROWN=LINE, BLUE=NEUTRAL,
GREEN/YELLOW=EARTH.
• This operation must be carried out by a qualified
electrician.
SAVE THESE INSTRUCTIONS CAREFULLY!
English

INSTALLATION

Apply the LED-JET adv water game in lieu of that supplied
with the pump. Connect the LED-JET adv cable to the
transformer output. Position the pump complete with
LED-JET adv in the water as required. Finally, plug the
transformer into a suitable protected socket upstream of
the differential switch (circuit breaker).

MAINTENANCE

Clean the LED-JET adv regularly, or whenever you note a
decrease in the lighting level. Unplug the transformer from
the power socket. Dismantle the LED-JET adv water game
from the pump, unscrew the transparent lid and clean
the components using water and a brush if necessary.
Ensure that all holes of the transparent lid are free and not
blocked. Replace the LED-JET adv on the pump and plug
the transformer back into the socket.
GUARANTEE CONDITIONS
This appliance is guaranteed from defects in its materials
and workmanship for a period of 3 years from the date of
purchase. If the appliance should not work correctly as
from the purchase date, return it to your local retailer. The
appliance will be replaced without any additional charge.
To use the guarantee service, return the appliance and
attach the proof of purchase and a detailed reason for the
claim. The appliance must be carefully packed and protected
from any damage during transport. The guarantee does not
cover damage due to impact or being dropped after purchase.
The guarantee is not valid if the product is used incorrectly or if
damage is caused by tampering or negligence by the purchaser
causing the loss of fish or other animals, personal damage,
loss of properties or other damage that might arise. The
guarantee is not valid for components subject to wear and tear.
CORRECT DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European
countries with separate collection systems). This marking
shown on the produci or its literature, indicates that it should
not be disposed with other household wastes at the end of
its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material
resources. • Household users should contact either the
retailer where they purchased this product, or their local
government office, for details of where and how they can
take this item for environmentally safe recycling. • Business
users should contact their supplier and check the terms and
conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.
4 / 24
2002/96/CE • EN50419

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-led 12 adv

Table of Contents