Advertisement
Available languages
Available languages
THE EDGE SPA STEP
If missing parts, call - Toll free U.S./Canada - 800-635-3213 or www.conferplastics.com
Check building codes/permitting. Consult your local Building Department before installation of your step
and equipment. Equipment installation must comply with the codes of the authority having jurisdiction and
may require permits (e.g., building, plumbing, electrical, zoning, etc.). Be sure that barriers (fences, gates, etc.)
restricting spa access meet local codes.
Check that you have all required parts. Check the contents of the carton with the Parts list for this step. All
parts and hardware are required. If any parts are missing, DO NOT attempt to assemble or install the steps.
Instead, call Toll Free U.S. - 800-635-3213 or visit our web site at www.conferplastics.com for assistance.
Select an appropriate location - The step must be located on a level solid base and in a location that will be
in full view of competent adult supervision when in use.
Follow all instructions
• For stable, correct assembly and installation, all instructions must be followed completely and in the
sequence shown.
• Follow the manufacturer's recommendations for the safe use of all hand tools and equipment used during
installation.
Lift safely. When lifting awkward or heavy loads, have another person help you.
Double check after installation
• Before using the product, after assembly and installation, go over the instructions and procedures again to
make sure nothing has been overlooked.
Parts List:
2 Sidewalls
1 Top Tread
1 Bottom Tread
1 Center Support
4 Footpads
Step 1: Slide the treads into place on the sidewall.
If necessary, tap with a rubber mallet to ensure
they're seated all the way.
Safe Installation
To reduce the risk of drowning, electrocution, falls, or other serious injury or
death:
Top Tread
Bottom Tread
Center Support
Step 2: Repeat for the other sidewall.
2
Sidewall
(2 Required)
Advertisement
