Windows Installation - Audient iD14 Manual

Mac Installation
3. Status LED
Once connected to your computer and
powered on, the white USB LED on iD14 will
illuminate.
If at any time the status LED turns off during
normal operation please check all connections
and if further problems develop please
contact Audient support.
4. Double Checking Connectivity
To ensure iD14 has been detected by your
computer and correct clocking sources are
set-up, navigate to:
Macintosh HD > Applications >
System Preferences
Check that iD14 is set as your i/o device.
It's recommended to disable system sounds.
5. Open the iD Mixer
Run the iD software. It will appear as an icon
in the Menu bar of MacOS. Click on this and
select "Open Mixer Software".
10

Windows Installation

Windows System Requirements:
• Windows 7 or later (32 or 64 bit)
• Intel Core 2 @ 1.6 GHz, or AMD
equivalent
• 1 GB RAM Minimum
1. Download the iD14 Software
Head to our website for the latest version of
our iD Windows Installer:
audient.com/products/downloads/
iD14
2. Connect iD14
Using the USB cable provided, connect
iD14 to your computer's USB port.
3. Run iD Mixer Setup
Double click on the installer to run the iD mixer
setup and follow the onscreen instructions.
4. Reboot PC
Reboot your PC to make sure that all the
drivers have been applied.
11